[PATCH v2 02/13] dt-bindings: media: mediatek: add seninf-core binding

[Rob Herring (Arm)]

On Mon, 07 Jul 2025 09:31:43 +0800, shangyao lin wrote:
> From: "shangyao.lin" <shangyao.lin at mediatek.com>
> 
> 1. Add camera isp7x module device document
> 
> ---
> 
> Changes in v2:
>   - Rename binding file to mediatek,mt8188-seninf-core.yaml
>   - Various fixes per review comments
>   - Update maintainers list
> 
> Question for reviewer (CK):
> 
> Hi CK,
> 
> Thank you for your review and suggestions on this patch, especially for providing the reference patch (https://patchwork.kernel.org/project/linux-mediatek/list/?series=874617) and for mentioning in another patch ([V1,02/10] MEDIA: PLATFORM: MEDIATEK: ADD SENINF CONTROLLER) the suggestion to "Move the phy part to phy/mediatek/ folder. You could refer to phy/mediatek/phy-mtk-mipi-csi-0-5.c".
> 
> After reading your comments and the reference patches, my understanding is that only the seninf-core driver should manage all ports internally, and each port corresponds to a PHY. During probe, the driver will parse each port, obtain the corresponding PHY (e.g., devm_phy_get(dev, "csi0"), devm_phy_get(dev, "csi1"), etc.), and operate the PHY for each port individually during stream on/off or power on/off.
> 
> Could you please confirm if my understanding is correct?
> If you have any additional reference patches or examples, I would greatly appreciate it.
> 
> Thank you for your guidance!
> 
> Best regards,
> Shangyao
> 
> Signed-off-by: shangyao.lin <shangyao.lin at mediatek.com>
> ---
>  .../mediatek/mediatek,mt8188-seninf-core.yaml | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100755 Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml:6:10: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml:121:4: [error] no new line character at the end of file (new-line-at-end-of-file)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:clock-names: {'items': [{'const': 'clk_cam_seninf'}, {'const': 'clk_top_seninf'}, {'const': 'clk_top_seninf1'}, {'const': 'clk_top_camtm'}], 'minItems': 4, 'maxItems': 4} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed:
	[{'const': 'clk_cam_seninf'}, {'const': 'clk_top_seninf'}, {'const': 'clk_top_seninf1'}, {'const': 'clk_top_camtm'}] is too long
	[{'const': 'clk_cam_seninf'}, {'const': 'clk_top_seninf'}, {'const': 'clk_top_seninf1'}, {'const': 'clk_top_camtm'}] is too short
	False schema does not allow 4
	1 was expected
	4 is greater than the maximum of 2
	4 is greater than the maximum of 3
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:reg-names: {'items': [{'const': 'base'}], 'minItems': 1, 'maxItems': 1} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:reg-names: 'oneOf' conditional failed, one must be fixed:
	[{'const': 'base'}] is too short
	False schema does not allow 1
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:reg: 'anyOf' conditional failed, one must be fixed:
	'minItems' is not one of ['maxItems', 'description', 'deprecated']
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
	'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
	1 is less than the minimum of 2
		hint: Arrays must be described with a combination of minItems/maxItems/items
	hint: cell array properties must define how many entries and what the entries are when there is more than one entry.
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/media/mediatek,seninf-core.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.example.dtb: seninf at 16010000 (mediatek,mt8188-seninf-core): reg: [[0, 369164288], [0, 32768]] is too long
	from schema $id: http://devicetree.org/schemas/media/mediatek,seninf-core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250707013154.4055874-3-shangyao.lin@mediatek.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.