[PATCH v2 03/13] dt-bindings: media: mediatek: add cam-raw binding

[Rob Herring (Arm)]

On Mon, 07 Jul 2025 09:31:44 +0800, shangyao lin wrote:
> From: "shangyao.lin" <shangyao.lin at mediatek.com>
> 
> Add camera isp7x module device document.
> 
> ---
> 
> Changes in v2:
>   - Rename binding file to mediatek,mt8188-cam-raw.yaml
>   - Various fixes per review comments
>   - Update maintainers list
> 
> Signed-off-by: shangyao.lin <shangyao.lin at mediatek.com>
> ---
>  .../mediatek/mediatek,mt8188-cam-raw.yaml     | 156 ++++++++++++++++++
>  1 file changed, 156 insertions(+)
>  create mode 100755 Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml:156:4: [error] no new line character at the end of file (new-line-at-end-of-file)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml: properties:clock-names: {'items': [{'const': 'camsys_cam2mm0_cgpdn'}, {'const': 'camsys_cam2mm1_cgpdn'}, {'const': 'camsys_cam2sys_cgpdn'}, {'const': 'camsys_cam_cgpdn'}, {'const': 'camsys_camtg_cgpdn'}, {'const': 'camsys_rawa_larbx_cgpdn'}, {'const': 'camsys_rawa_cam_cgpdn'}, {'const': 'camsys_rawa_camtg_cgpdn'}, {'const': 'topckgen_top_cam'}, {'const': 'topckgen_top_camtg'}, {'const': 'topckgen_top_camtm'}], 'minItems': 4, 'maxItems': 16, 'description': 'Names of the clocks, must match the order of the clocks property.'} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml: properties:reg-names: {'items': [{'const': 'base'}, {'const': 'inner_base'}], 'minItems': 1, 'maxItems': 2, 'description': 'Names for each register region. Must be "base" and optionally "inner_base".'} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:33.13-34.43: Warning (reg_format): /example-0/soc/raw at 16030000:reg: property has invalid length (32 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:37.13-59: Warning (dma_ranges_format): /example-0/soc/raw at 16030000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:31.24-78.13: Warning (avoid_default_addr_size): /example-0/soc/raw at 16030000: Relying on default #address-cells value
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:31.24-78.13: Warning (avoid_default_addr_size): /example-0/soc/raw at 16030000: Relying on default #size-cells value
Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: raw at 16030000 (mediatek,mt8188-cam-raw): dma-ranges: [[2], [0], [0], [1073741824], [1], [0]] is too long
	from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: raw at 16030000 (mediatek,mt8188-cam-raw): reg: [[0, 369295360], [0, 32768], [0, 369328128], [0, 32768]] is too long
	from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250707013154.4055874-4-shangyao.lin@mediatek.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.