[PATCH v2 2/6] drm/bridge: dw-hdmi-qp: Fixup timer base setup

[Cristian Ciocaltea]

Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC.  As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.

However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.

Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver.

While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c | 11 ++++++++---
 include/drm/bridge/dw_hdmi_qp.h              |  1 +
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
index cfe8171b2183874517f583f284f7728fe1613c91..5d252800168aa4f3c10f458631795de8912e29d4 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
@@ -161,6 +161,7 @@ struct dw_hdmi_qp {
 		void *data;
 	} phy;
 
+	unsigned long ref_clk_rate;
 	struct regmap *regm;
 
 	unsigned long tmds_char_rate;
@@ -1222,13 +1223,11 @@ static void dw_hdmi_qp_init_hw(struct dw_hdmi_qp *hdmi)
 {
 	dw_hdmi_qp_write(hdmi, 0, MAINUNIT_0_INT_MASK_N);
 	dw_hdmi_qp_write(hdmi, 0, MAINUNIT_1_INT_MASK_N);
-	dw_hdmi_qp_write(hdmi, 428571429, TIMER_BASE_CONFIG0);
+	dw_hdmi_qp_write(hdmi, hdmi->ref_clk_rate, TIMER_BASE_CONFIG0);
 
 	/* Software reset */
 	dw_hdmi_qp_write(hdmi, 0x01, I2CM_CONTROL0);
-
 	dw_hdmi_qp_write(hdmi, 0x085c085c, I2CM_FM_SCL_CONFIG0);
-
 	dw_hdmi_qp_mod(hdmi, 0, I2CM_FM_EN, I2CM_INTERFACE_CONTROL0);
 
 	/* Clear DONE and ERROR interrupts */
@@ -1254,6 +1253,11 @@ struct dw_hdmi_qp *dw_hdmi_qp_bind(struct platform_device *pdev,
 		return ERR_PTR(-ENODEV);
 	}
 
+	if (!plat_data->ref_clk_rate) {
+		dev_err(dev, "Missing ref_clk rate\n");
+		return ERR_PTR(-ENODEV);
+	}
+
 	hdmi = devm_drm_bridge_alloc(dev, struct dw_hdmi_qp, bridge,
 				     &dw_hdmi_qp_bridge_funcs);
 	if (IS_ERR(hdmi))
@@ -1273,6 +1277,7 @@ struct dw_hdmi_qp *dw_hdmi_qp_bind(struct platform_device *pdev,
 
 	hdmi->phy.ops = plat_data->phy_ops;
 	hdmi->phy.data = plat_data->phy_data;
+	hdmi->ref_clk_rate = plat_data->ref_clk_rate;
 
 	dw_hdmi_qp_init_hw(hdmi);
 
diff --git a/include/drm/bridge/dw_hdmi_qp.h b/include/drm/bridge/dw_hdmi_qp.h
index b4a9b739734ec7b67013b683fe6017551aa19172..76ecf31301997718604a05f70ce9eab8695e26b5 100644
--- a/include/drm/bridge/dw_hdmi_qp.h
+++ b/include/drm/bridge/dw_hdmi_qp.h
@@ -24,6 +24,7 @@ struct dw_hdmi_qp_plat_data {
 	void *phy_data;
 	int main_irq;
 	int cec_irq;
+	unsigned long ref_clk_rate;
 };
 
 struct dw_hdmi_qp *dw_hdmi_qp_bind(struct platform_device *pdev,

-- 
2.50.0