drm-ci: rk3399-gru-kevin: kms_color at legacy-gamma flake
Vignesh Raman
vignesh.raman at collabora.com
Thu Jul 10 10:40:51 UTC 2025
Hi Maintainers,
There are some flake test reported for rockchip driver testing in drm-ci.
# Board Name: rk3399-gru-kevin
# Failure Rate: 40
# IGT Version: 2.1-g26ddb59c1
# Linux Version: 6.16.0-rc2
kms_color at legacy-gamma
(kms_color:1399) CRITICAL: Test assertion failure function
run_gamma_degamma_tests_for_pipe, file ../tests/kms_color.c:787:
(kms_color:1399) CRITICAL: Failed assertion: test_t(data, data->primary)
Dynamic subtest pipe-A-eDP-1 failed.
**** DEBUG ****
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: !(pipe >=
display->n_pipes || !display->pipes[pipe].enabled)
(kms_color:1399) igt_pipe_crc-DEBUG: Test requirement passed: dir >= 0
(kms_color:1399) igt_pipe_crc-DEBUG: Test requirement passed:
fstatat(dir, "crtc-0/crc/control", &stat, 0) == 0
(kms_color:1399) DEBUG: Test requirement passed: pipe->n_planes >= 0
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: set_pipe(A)
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: Selecting pipe A
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: set_pipe(None)
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: Selecting pipe None
(kms_color:1399) DEBUG: Test requirement passed:
pipe_output_combo_valid(data, p)
(kms_color:1399) DEBUG: Test requirement passed: legacy_lut_size > 0
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: set_pipe(A)
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: Selecting pipe A
(kms_color:1399) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=2400,
height=1600, format=XR24(0x34325258), modifier=0x0, size=0)
(kms_color:1399) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=1,
pitch=9600)
(kms_color:1399) ioctl_wrappers-DEBUG: Test requirement passed:
igt_has_fb_modifiers(fd)
(kms_color:1399) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=2400,
height=1600, format=XR24(0x34325258), modifier=0x0, size=0)
(kms_color:1399) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2,
pitch=9600)
(kms_color:1399) ioctl_wrappers-DEBUG: Test requirement passed:
igt_has_fb_modifiers(fd)
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_fb(59)
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_size (2400x1600)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_size(2400x1600)
(kms_color:1399) igt_kms-DEBUG: display: commit {
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: Fixing up initial rotation
pipe A, plane 0
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: SetCrtc pipe A, fb
59, src (0, 0), mode 2400x1600
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: Fixing up initial rotation
pipe A, plane 1
(kms_color:1399) igt_kms-DEBUG: display: SetPlane pipe A, plane 1,
disabling
(kms_color:1399) igt_kms-DEBUG: display: SetProp plane A.1
"rotation" to 0x1/1
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: Fixing up initial rotation
pipe A, plane 2
(kms_color:1399) igt_kms-DEBUG: display: SetPlane pipe A, plane 2,
disabling
(kms_color:1399) igt_kms-DEBUG: display: SetProp plane A.2
"rotation" to 0x1/1
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: Fixing up initial rotation
pipe A, plane 3
(kms_color:1399) igt_kms-DEBUG: display: SetCursor pipe A, disabling
(kms_color:1399) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0)
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: Fixing up initial rotation
pipe B, plane 0
(kms_color:1399) igt_kms-DEBUG: display: SetCrtc pipe B, disabling
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: Fixing up initial rotation
pipe B, plane 1
(kms_color:1399) igt_kms-DEBUG: display: SetCursor pipe B, disabling
(kms_color:1399) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0)
(kms_color:1399) igt_kms-DEBUG: display: }
(kms_color:1399) igt_fb-DEBUG: Test requirement passed:
cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_fb(58)
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_size (2400x1600)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_size(2400x1600)
(kms_color:1399) igt_kms-DEBUG: display: commit {
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: SetCrtc pipe A, fb
58, src (0, 0), mode 2400x1600
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: }
(kms_color:1399) igt_fb-DEBUG: Test requirement passed:
cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_fb(58)
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_size (2400x1600)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_size(2400x1600)
(kms_color:1399) igt_kms-DEBUG: display: commit {
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: SetCrtc pipe A, fb
58, src (0, 0), mode 2400x1600
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: }
(kms_color:1399) igt_pipe_crc-DEBUG: CRC mismatch at index 0: 0x780 !=
0xcc65
(kms_color:1399) igt_kms-DEBUG: display: commit {
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: }
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_fb(0)
(kms_color:1399) igt_kms-DEBUG: display: A.0: plane_set_size (0x0)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_color:1399) igt_kms-DEBUG: display: A.0: fb_set_size(0x0)
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: set_pipe(None)
(kms_color:1399) igt_kms-DEBUG: display: eDP-1: Selecting pipe None
(kms_color:1399) igt_kms-DEBUG: display: commit {
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: SetCrtc pipe A, disabling
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_color:1399) igt_kms-DEBUG: display: }
(kms_color:1399) CRITICAL: Test assertion failure function
run_gamma_degamma_tests_for_pipe, file ../tests/kms_color.c:787:
(kms_color:1399) CRITICAL: Failed assertion: test_t(data, data->primary)
(kms_color:1399) igt_core-INFO: Stack trace:
(kms_color:1399) igt_core-INFO: #0 ../lib/igt_core.c:2075
__igt_fail_assert()
(kms_color:1399) igt_core-INFO: #1 ../tests/kms_color.c:785
run_tests_for_pipe()
(kms_color:1399) igt_core-INFO: #2 ../tests/kms_color.c:1182
__igt_unique____real_main1169()
(kms_color:1399) igt_core-INFO: #3 ../tests/kms_color.c:1169 main()
(kms_color:1399) igt_core-INFO: #4 [__libc_init_first+0x80]
(kms_color:1399) igt_core-INFO: #5 [__libc_start_main+0x98]
(kms_color:1399) igt_core-INFO: #6 [_start+0x30]
Pipeline: https://gitlab.freedesktop.org/vigneshraman/msm/-/jobs/79896647
Please could you have a look at these test results and let us know if
you need more information. Thank you.
Regards,
Vignesh
More information about the dri-devel
mailing list