[PATCH 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()

[Cristian Ciocaltea]

Hi Brian,

On 7/10/25 7:07 PM, Brian Masney wrote:
> The round_rate() clk ops is deprecated, so migrate this driver from
> round_rate() to determine_rate() using the Coccinelle semantic patch
> on the cover letter of this series.
> 
> Signed-off-by: Brian Masney <bmasney at redhat.com>
> ---
>  drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> index 79db57ee90d1487b51f4ddadde870a275dd7b17b..f027d2caa4c2ebfc0fdec08bcebf3f415ff1a064 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> @@ -1869,8 +1869,8 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
>  	return hdptx->hw_rate;
>  }
>  
> -static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> -					unsigned long *parent_rate)
> +static int rk_hdptx_phy_clk_determine_rate(struct clk_hw *hw,
> +					   struct clk_rate_request *req)
>  {
>  	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
>  
> @@ -1879,14 +1879,17 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
>  	 * To be dropped as soon as the RK DW HDMI QP bridge driver
>  	 * switches to make use of phy_configure().
>  	 */
> -	if (!hdptx->restrict_rate_change && rate != hdptx->hdmi_cfg.tmds_char_rate) {
> +	if (!hdptx->restrict_rate_change && req->rate != hdptx->hdmi_cfg.tmds_char_rate) {
>  		struct phy_configure_opts_hdmi hdmi = {
> -			.tmds_char_rate = rate,
> +			.tmds_char_rate = req->rate,
>  		};
>  		int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi);
>  
> -		if (ret)
> -			return ret;
> +		if (ret) {
> +			req->rate = ret;

This is not quite right, since "ret" is expected to contain an error number,
typically -EINVAL.

> +
> +			return 0;

We shall continue returning the error code here.

Regards,
Cristian

> +		}
>  
>  		hdptx->hdmi_cfg = hdmi;
>  	}
> @@ -1896,7 +1899,9 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
>  	 * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with
>  	 * a different rate argument.
>  	 */
> -	return hdptx->hdmi_cfg.tmds_char_rate;
> +	req->rate = hdptx->hdmi_cfg.tmds_char_rate;
> +
> +	return 0;
>  }
>  
>  static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> @@ -1925,7 +1930,7 @@ static const struct clk_ops hdptx_phy_clk_ops = {
>  	.prepare = rk_hdptx_phy_clk_prepare,
>  	.unprepare = rk_hdptx_phy_clk_unprepare,
>  	.recalc_rate = rk_hdptx_phy_clk_recalc_rate,
> -	.round_rate = rk_hdptx_phy_clk_round_rate,
> +	.determine_rate = rk_hdptx_phy_clk_determine_rate,
>  	.set_rate = rk_hdptx_phy_clk_set_rate,
>  };
>  
>