[PATCH 2/5] dt-bindings: display: sitronix,st7571: add optional inverted property

[Rob Herring]

On Mon, Jul 14, 2025 at 10:04:00AM +0200, Marcus Folkesson wrote:
> Depending on which display that is connected to the controller, an "1"
> means either a black or a white pixel.
> 
> The supported formats (R1/R2/XRGB8888) expects the pixels
> to map against (4bit):
> 00 => Black
> 01 => Dark Gray
> 10 => Light Gray
> 11 => White
> 
> If this is not what the display map against, the controller has support
> to invert these values.
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
> ---
>  Documentation/devicetree/bindings/display/sitronix,st7571.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/sitronix,st7571.yaml b/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
> index 4fea782fccd701f5095a08290c13722a12a58b52..065d61b718dc92e04419056b1e2d73fd0b2cb345 100644
> --- a/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
> +++ b/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
> @@ -28,6 +28,11 @@ properties:
>      description:
>        Display supports 4-level grayscale.
>  
> +  sitronix,inverted:
> +    type: boolean
> +    description: |

Don't need '|'.

> +      Display pixels are inverted, i.e. 0 is white and 1 is black.
> +
>    reset-gpios: true
>    width-mm: true
>    height-mm: true
> 
> -- 
> 2.49.0
>