[PATCH v2 06/10] dt-bindings: display: imx: Add bindings for i.MX94 DCIF

[Krzysztof Kozlowski]

On 16/07/2025 10:15, Laurentiu Palcu wrote:
> DCIF is the i.MX94 Display Controller Interface which is used to
> drive a TFT LCD panel or connects to a display interface depending
> on the chip configuration.
> 
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>


...

> +
> +  interrupts:
> +    items:
> +      - description:
> +          Interrupt output for CPU domain 0 (controlled by common registers group).
> +      - description:
> +          Interrupt output for CPU domain 1 (controlled by background layer registers group).
> +      - description:
> +          Interrupt output for CPU domain 2 (controlled by foreground layer registers group).


Keep these in one line with description, by dropping redundant part
"Interrupt output for".

> +
> +  interrupt-names:
> +    items:
> +      - const: common
> +      - const: bg_layer
> +      - const: fg_layer
> +
> +  clocks:
> +    items:
> +      - description: APB bus clock
> +      - description: AXI bus clock
> +      - description: Pixel clock
> +
> +  clock-names:
> +    items:
> +      - const: apb
> +      - const: axi
> +      - const: pix
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  nxp,blk-ctrl:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: A phandle which points to NXP displaymix blk-ctrl.


Describe for what purpose (from hardware point of view)

With these improvements:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description: Display Pixel Interface(DPI) output port
> +


Best regards,
Krzysztof