[PATCH v2 4/6] drm/st7571-i2c: add support for inverted pixel format
Marcus Folkesson
marcus.folkesson at gmail.com
Mon Jul 21 10:43:34 UTC 2025
Depending on which display that is connected to the controller, an
"1" means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, make it possible to invert
the pixels.
Reviewed-by: Javier Martinez Canillas <javierm at redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
---
drivers/gpu/drm/sitronix/st7571-i2c.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sitronix/st7571-i2c.c b/drivers/gpu/drm/sitronix/st7571-i2c.c
index dfdd0fa4ff24090c3cbe7ab162285be45464d6a6..9f2de057ce9d990fdd77e395a6c32ba1e2f36137 100644
--- a/drivers/gpu/drm/sitronix/st7571-i2c.c
+++ b/drivers/gpu/drm/sitronix/st7571-i2c.c
@@ -151,6 +151,7 @@ struct st7571_device {
bool ignore_nak;
bool grayscale;
+ bool inverted;
u32 height_mm;
u32 width_mm;
u32 startline;
@@ -792,6 +793,7 @@ static int st7567_parse_dt(struct st7571_device *st7567)
of_property_read_u32(np, "width-mm", &st7567->width_mm);
of_property_read_u32(np, "height-mm", &st7567->height_mm);
+ st7567->inverted = of_property_read_bool(np, "sitronix,inverted");
st7567->pformat = &st7571_monochrome;
st7567->bpp = 1;
@@ -819,6 +821,7 @@ static int st7571_parse_dt(struct st7571_device *st7571)
of_property_read_u32(np, "width-mm", &st7571->width_mm);
of_property_read_u32(np, "height-mm", &st7571->height_mm);
st7571->grayscale = of_property_read_bool(np, "sitronix,grayscale");
+ st7571->inverted = of_property_read_bool(np, "sitronix,inverted");
if (st7571->grayscale) {
st7571->pformat = &st7571_grayscale;
@@ -873,7 +876,7 @@ static int st7567_lcd_init(struct st7571_device *st7567)
ST7571_SET_POWER(0x6), /* Power Control, VC: ON, VR: ON, VF: OFF */
ST7571_SET_POWER(0x7), /* Power Control, VC: ON, VR: ON, VF: ON */
- ST7571_SET_REVERSE(0),
+ ST7571_SET_REVERSE(st7567->inverted ? 1 : 0),
ST7571_SET_ENTIRE_DISPLAY_ON(0),
};
@@ -917,7 +920,7 @@ static int st7571_lcd_init(struct st7571_device *st7571)
ST7571_SET_COLOR_MODE(st7571->pformat->mode),
ST7571_COMMAND_SET_NORMAL,
- ST7571_SET_REVERSE(0),
+ ST7571_SET_REVERSE(st7571->inverted ? 1 : 0),
ST7571_SET_ENTIRE_DISPLAY_ON(0),
};
--
2.49.0
More information about the dri-devel
mailing list