[PATCH 1/3] dt-bindings: display: panel: Add Samsung EA8076 panel

[Rob Herring (Arm)]

On Wed, 23 Jul 2025 16:52:08 +0200, Alicja Michalska wrote:
> Add bindings for Samsung EA8076 LCD panel.
> This panel was usually used in mid-high end smartphones manufactured by
> Xiaomi in 2018 and 2019 (Mi 9 Lite and Mi Mix 3, with codenames
> "xiaomi-pyxis" and "xiaomi-perseus", respectively).
> 
> Signed-off-by: Alicja Michalska <alicja.michalska at 9elements.com>
> ---
>  .../display/panel/samsung,ea8076.yaml         | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml:9:111: [warning] line too long (155 > 110 characters) (line-length)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: ignoring, error in schema: properties: reset-gpios
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: properties:port: 'Required on platforms using MDSS DSI (Qualcomm).' is not of type 'object', 'boolean'
	from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: properties:te-gpios: 'VSync GPIO pin, usually GPIO_ACTIVE_LOW.' is not of type 'object', 'boolean'
	from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: properties:reset-gpios: 'Reset GPIO pin, usually GPIO_ACTIVE_LOW.' is not of type 'object', 'boolean'
	from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: properties:port: 'Required on platforms using MDSS DSI (Qualcomm).' is not of type 'object', 'boolean'
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: properties:te-gpios: 'VSync GPIO pin, usually GPIO_ACTIVE_LOW.' is not of type 'object', 'boolean'
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,ea8076.yaml: properties:reset-gpios: 'Reset GPIO pin, usually GPIO_ACTIVE_LOW.' is not of type 'object', 'boolean'
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
Documentation/devicetree/bindings/display/panel/samsung,ea8076.example.dtb: /example-0/dsi/panel at 0: failed to match any schema with compatible: ['samsung,ea8076']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250723145208.338162-2-alicja.michalska@9elements.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.