[PATCH v3 14/14] drm/bridge: analogix_dp: Apply panel_bridge helper

[Damon Ding]

In order to unify the handling of the panel and bridge, apply
panel_bridge helpers for Analogix DP driver. With this patch, the
bridge support will also become available.

The following changes have ben made:
- Apply plane_bridge helper to wrap the panel as the bridge.
- Remove the explicit panel APIs calls, which can be replaced with
  the automic bridge APIs calls wrapped by the panel.
- Unify the API of getting modes to drm_bridge_get_modes().

Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 30 +++++++++++--------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index bf0b1c0912e4..18f631c83300 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -948,11 +948,7 @@ static int analogix_dp_bridge_get_modes(struct drm_bridge *bridge, struct drm_co
 	struct analogix_dp_device *dp = to_dp(bridge);
 	int num_modes = 0;
 
-	if (dp->plat_data->panel)
-		num_modes += drm_panel_get_modes(dp->plat_data->panel, connector);
-
-	if (dp->plat_data->bridge)
-		num_modes += drm_bridge_get_modes(dp->plat_data->bridge, connector);
+	num_modes += drm_bridge_get_modes(dp->plat_data->bridge, connector);
 
 	if (dp->plat_data->get_modes)
 		num_modes += dp->plat_data->get_modes(dp->plat_data, connector);
@@ -995,7 +991,7 @@ analogix_dp_bridge_detect(struct drm_bridge *bridge)
 	struct analogix_dp_device *dp = to_dp(bridge);
 	enum drm_connector_status status = connector_status_disconnected;
 
-	if (dp->plat_data->panel)
+	if (drm_bridge_is_panel(dp->plat_data->bridge))
 		return connector_status_connected;
 
 	if (!analogix_dp_detect_hpd(dp))
@@ -1080,8 +1076,6 @@ static void analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge,
 	/* Don't touch the panel if we're coming back from PSR */
 	if (old_crtc_state && old_crtc_state->self_refresh_active)
 		return;
-
-	drm_panel_prepare(dp->plat_data->panel);
 }
 
 static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
@@ -1236,7 +1230,6 @@ static void analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge,
 	while (timeout_loop < MAX_PLL_LOCK_LOOP) {
 		if (analogix_dp_set_bridge(dp) == 0) {
 			dp->dpms_mode = DRM_MODE_DPMS_ON;
-			drm_panel_enable(dp->plat_data->panel);
 			return;
 		}
 		dev_err(dp->dev, "failed to set bridge, retry: %d\n",
@@ -1254,16 +1247,12 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 	if (dp->dpms_mode != DRM_MODE_DPMS_ON)
 		return;
 
-	drm_panel_disable(dp->plat_data->panel);
-
 	disable_irq(dp->irq);
 
 	analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
 
 	pm_runtime_put_sync(dp->dev);
 
-	drm_panel_unprepare(dp->plat_data->panel);
-
 	dp->fast_train_enable = false;
 	dp->psr_supported = false;
 	dp->dpms_mode = DRM_MODE_DPMS_OFF;
@@ -1599,6 +1588,21 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
 		goto err_unregister_aux;
 	}
 
+	if (dp->plat_data->panel) {
+		dp->plat_data->bridge = devm_drm_panel_bridge_add(dp->dev, dp->plat_data->panel);
+		if (IS_ERR(dp->plat_data->bridge)) {
+			ret = PTR_ERR(bridge);
+			goto err_unregister_aux;
+		}
+	}
+
+	ret = drm_bridge_attach(dp->encoder, dp->plat_data->bridge, bridge,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(dp->dev, "failed to attach following panel or bridge (%d)\n", ret);
+		goto err_unregister_aux;
+	}
+
 	return 0;
 
 err_unregister_aux:
-- 
2.34.1