[PATCH] drm/bridge: lt9611uxc: extend mode valid checks

[Nilesh Laad]

Currently valid mode checks are only for hdisplay and vdisplay,
add htotal and vtotal to filter only specific modes.

Signed-off-by: Nilesh Laad <nilesh.laad at oss.qualcomm.com>
---
 drivers/gpu/drm/bridge/lontium-lt9611uxc.c | 36 +++++++++++++++++-------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
index 38fb8776c0f4..cfe389b4c25c 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611uxc.c
@@ -89,7 +89,9 @@ static const struct regmap_config lt9611uxc_regmap_config = {
 
 struct lt9611uxc_mode {
 	u16 hdisplay;
+	u16 htotal;
 	u16 vdisplay;
+	u16 vtotal;
 	u8 vrefresh;
 };
 
@@ -98,22 +100,22 @@ struct lt9611uxc_mode {
  * Enumerate them here to check whether the mode is supported.
  */
 static struct lt9611uxc_mode lt9611uxc_modes[] = {
-	{ 1920, 1080, 60 },
-	{ 1920, 1080, 30 },
-	{ 1920, 1080, 25 },
-	{ 1366, 768, 60 },
-	{ 1360, 768, 60 },
-	{ 1280, 1024, 60 },
-	{ 1280, 800, 60 },
-	{ 1280, 720, 60 },
-	{ 1280, 720, 50 },
-	{ 1280, 720, 30 },
-	{ 1152, 864, 60 },
-	{ 1024, 768, 60 },
-	{ 800, 600, 60 },
-	{ 720, 576, 50 },
-	{ 720, 480, 60 },
-	{ 640, 480, 60 },
+	{ 1920, 2200, 1080, 1125, 60 },
+	{ 1920, 2200, 1080, 1125, 30 },
+	{ 1920, 2640, 1080, 1125, 25 },
+	{ 1366, 1792, 768, 798, 60 },
+	{ 1360, 1792, 768, 795, 60 },
+	{ 1280, 1688, 1024, 1066, 60 },
+	{ 1280, 1680, 800, 831, 60 },
+	{ 1280, 1650, 720, 750, 60 },
+	{ 1280, 1980, 720, 750, 50 },
+	{ 1280, 3300, 720, 750, 30 },
+	{ 1152, 1600, 864, 900, 60 },
+	{ 1024, 1344, 768, 806, 60 },
+	{ 800, 1056, 600, 628, 60 },
+	{ 720, 864, 576, 625, 50 },
+	{ 720, 858, 480, 525, 60 },
+	{ 640, 800, 480, 525, 60 },
 };
 
 static struct lt9611uxc *bridge_to_lt9611uxc(struct drm_bridge *bridge)
@@ -237,7 +239,9 @@ static struct lt9611uxc_mode *lt9611uxc_find_mode(const struct drm_display_mode
 
 	for (i = 0; i < ARRAY_SIZE(lt9611uxc_modes); i++) {
 		if (lt9611uxc_modes[i].hdisplay == mode->hdisplay &&
+		    lt9611uxc_modes[i].htotal == mode->htotal &&
 		    lt9611uxc_modes[i].vdisplay == mode->vdisplay &&
+		    lt9611uxc_modes[i].vtotal == mode->vtotal &&
 		    lt9611uxc_modes[i].vrefresh == drm_mode_vrefresh(mode)) {
 			return &lt9611uxc_modes[i];
 		}

---
base-commit: e48123c607a0db8b9ad02f83c8c3d39918dbda06
change-id: 20250725-lt9611uxc-modes-d59bd4d49442

Best regards,
--  
Nilesh Laad <nilesh.laad at oss.qualcomm.com>