[PATCH 02/12] dt-bindings: display: st,stm32-ltdc: add access-controllers property

[Raphael Gallais-Pou]

access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).

This property is added when the peripheral is under the STM32 firewall
controller.  It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus.  The firewall can then check
the peripheral accesses before allowing its device to probe.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 546f57cb7a402b82e868aa05f874c65b8da19444..962938978d4854c68d608dad0b190ef3f6a7ba63 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -36,6 +36,9 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: |

-- 
2.25.1