[PATCH drm-dp 02/10] drm/hisilicon/hibmc: fix dp probabilistical detect errors after HPD irq
Dmitry Baryshkov
dmitry.baryshkov at oss.qualcomm.com
Mon Jun 9 14:49:04 UTC 2025
On 09/06/2025 17:47, Yongbang Shi wrote:
>
>> On Fri, May 30, 2025 at 05:54:24PM +0800, Yongbang Shi wrote:
>>> From: Baihan Li <libaihan at huawei.com>
>>>
>>> The debouncing when HPD pulled out still remains sometimes, 200ms
>>> still can
>>> not ensure helper_detect() is correct. So add a flag to hold the sink
>>> status, and changed detect_ctx() functions by using flag to check
>>> status.
>>>
>>> Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug
>>> detect of irq feature")
>>> Signed-off-by: Baihan Li <libaihan at huawei.com>
>>> ---
>>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h | 1 +
>>> .../gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c | 38 +++++++++++++------
>>> 2 files changed, 28 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h b/drivers/
>>> gpu/drm/hisilicon/hibmc/dp/dp_hw.h
>>> index 665f5b166dfb..68867475508c 100644
>>> --- a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h
>>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h
>>> @@ -50,6 +50,7 @@ struct hibmc_dp {
>>> struct drm_dp_aux aux;
>>> struct hibmc_dp_cbar_cfg cfg;
>>> u32 irq_status;
>>> + int hpd_status;
>>> };
>>> int hibmc_dp_hw_init(struct hibmc_dp *dp);
>>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c b/
>>> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>>> index d06832e62e96..191fb434baa7 100644
>>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>>> @@ -13,7 +13,8 @@
>>> #include "hibmc_drm_drv.h"
>>> #include "dp/dp_hw.h"
>>> -#define DP_MASKED_SINK_HPD_PLUG_INT BIT(2)
>>> +#define HIBMC_DP_MASKED_SINK_HPD_PLUG_INT BIT(2)
>>> +#define HIBMC_DP_MASKED_SINK_HPD_UNPLUG_INT BIT(3)
>>> static int hibmc_dp_connector_get_modes(struct drm_connector
>>> *connector)
>>> {
>>> @@ -34,9 +35,12 @@ static int hibmc_dp_connector_get_modes(struct
>>> drm_connector *connector)
>>> static int hibmc_dp_detect(struct drm_connector *connector,
>>> struct drm_modeset_acquire_ctx *ctx, bool force)
>>> {
>>> - mdelay(200);
>>> + struct hibmc_dp *dp = to_hibmc_dp(connector);
>>> - return drm_connector_helper_detect_from_ddc(connector, ctx, force);
>>> + if (dp->hpd_status)
>>> + return connector_status_connected;
>>> + else
>>> + return connector_status_disconnected;
>>> }
>>> static const struct drm_connector_helper_funcs
>>> hibmc_dp_conn_helper_funcs = {
>>> @@ -115,22 +119,34 @@ irqreturn_t hibmc_dp_hpd_isr(int irq, void *arg)
>>> {
>>> struct drm_device *dev = (struct drm_device *)arg;
>>> struct hibmc_drm_private *priv = to_hibmc_drm_private(dev);
>>> + struct hibmc_dp *dp = &priv->dp;
>>> int idx;
>>> if (!drm_dev_enter(dev, &idx))
>>> return -ENODEV;
>>> - if (priv->dp.irq_status & DP_MASKED_SINK_HPD_PLUG_INT) {
>>> - drm_dbg_dp(&priv->dev, "HPD IN isr occur!\n");
>>> - hibmc_dp_hpd_cfg(&priv->dp);
>>> + if (dp->hpd_status) { /* only check unplug int when the last
>>> status is HPD in */
>> I think this way you'll ignore HPD short pulses. Could you possibly
>> clarify whether it is the case or not?
>
> We actually doesn't enable short HPD here, this feature just used in our
> electrical tests.
>
>
>>> + if ((dp->irq_status & HIBMC_DP_MASKED_SINK_HPD_UNPLUG_INT)) {
>>> + drm_dbg_dp(dev, "HPD OUT isr occur.");
>>> + hibmc_dp_reset_link(dp);
>>> + dp->hpd_status = 0;
>>> + if (dev->registered)
>>> + drm_connector_helper_hpd_irq_event(&dp->connector);
>>> + } else {
>>> + drm_warn(dev, "HPD OUT occurs, irq status err: %u", dp-
>>> >irq_status);
>> These should be ratelimited.
>
> Sorry, I didn't get it. Do you mean I need print the link rate here?
>
No, I was thinking about drm_err_ratelimited() in case something gets
stuck in the hw.
--
With best wishes
Dmitry
More information about the dri-devel
mailing list