[PATCH v6 01/11] mtd: core: always create master device

[Richard Weinberger]

----- Ursprüngliche Mail -----
> Von: "Guenter Roeck" <linux at roeck-us.net>
>>> I am trying to boot from "pnor". It looks like the partition data (from
>>> devicetree)
>>> is now ignored. mtdblock6 used to be the second flash.
>>>
>>> Guenter
>> 
>> Is this with CONFIG_MTD_PARTITIONED_MASTER?
>> 
> 
> Yes
> 
>> I think that mtd_is_partition is ambiguous now.
>> We always have master partition when CONFIG_MTD_PARTITIONED_MASTER
>> is enabled and parent check is useless.
>> We must check grandparent in this case.
>> Miquel, am I right?
>> 
>> We can return to older patch version that have created partition
>> instead of the master device.
>> Or try to fix mtd_is_partition, like below.
>> Guenter, is below patch helps?
>> 
> No, it does not make a difference. Partitions are still not created.

Looks like all partition parsing is broken when CONFIG_MTD_PARTITIONED_MASTER=y is set.
Alexander, I was able to reproduce with MTDRAM and the mtdparts= kernel parameter.
Build with CONFIG_MTD_MTDRAM=y and CONFIG_MTD_PARTITIONED_MASTER=y,
pass mtdparts=\"mtdram test device:256k(foo)ro,-(bar)\" to the kernel command line.

Before your change:
$ cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 00400000 00020000 "mtdram test device"
mtd1: 00040000 00020000 "foo"
mtd2: 003c0000 00020000 "bar"

After:
$ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00400000 00020000 "mtdram test device"

Hope this helps!

Thanks,
//richard