[PATCH drm-dp 07/10] drm/hisilicon/hibmc: add dp encoder modeset
Yongbang Shi
shiyongbang at huawei.com
Tue Jun 10 13:30:01 UTC 2025
> On Fri, May 30, 2025 at 05:54:29PM +0800, Yongbang Shi wrote:
>> From: Baihan Li <libaihan at huawei.com>
>>
>> Add GPU display control enable in dp_mode_set(), which is already
>> in vdac's mode_set, however, if vdac is not connected, GPU
>> cannot work.
>>
>> Fixes: f9698f802e50 ("drm/hisilicon/hibmc: Restructuring the header dp_reg.h")
> Typically, incorrect tag.
>
>> Signed-off-by: Baihan Li <libaihan at huawei.com>
>> ---
>> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>> index e4b13f21ccb3..d9ae7567ebb7 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
>> @@ -11,6 +11,7 @@
>> #include <drm/drm_edid.h>
>>
>> #include "hibmc_drm_drv.h"
>> +#include "hibmc_drm_regs.h"
>> #include "dp/dp_hw.h"
>>
>> #define HIBMC_DP_MASKED_SINK_HPD_PLUG_INT BIT(2)
>> @@ -169,9 +170,26 @@ static void hibmc_dp_encoder_disable(struct drm_encoder *drm_encoder,
>> hibmc_dp_display_en(dp, false);
>> }
>>
>> +static void hibmc_dp_encoder_mode_set(struct drm_encoder *encoder,
>> + struct drm_crtc_state *crtc_state,
>> + struct drm_connector_state *conn_state)
>> +{
>> + struct drm_device *dev = encoder->dev;
>> + struct hibmc_drm_private *priv = to_hibmc_drm_private(dev);
>> + u32 reg;
>> +
>> + reg = readl(priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE);
>> + reg |= HIBMC_DISPLAY_CONTROL_FPVDDEN(1);
>> + reg |= HIBMC_DISPLAY_CONTROL_PANELDATE(1);
>> + reg |= HIBMC_DISPLAY_CONTROL_FPEN(1);
>> + reg |= HIBMC_DISPLAY_CONTROL_VBIASEN(1);
>> + writel(reg, priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE);
> This is a c&p of the corresponding VDAC code. Please move it to a common
> function instead.
>
> BTW: what does it mean that the GPU cannot work? Do you mean that the
> display hardware doesn't work or that the GL calls do not work?
Okay, I will delete it here.
It's about hardware, which may cause no signal.
>> +}
>> +
>> static const struct drm_encoder_helper_funcs hibmc_dp_encoder_helper_funcs = {
>> .atomic_enable = hibmc_dp_encoder_enable,
>> .atomic_disable = hibmc_dp_encoder_disable,
>> + .atomic_mode_set = hibmc_dp_encoder_mode_set,
>> };
>>
>> irqreturn_t hibmc_dp_hpd_isr(int irq, void *arg)
>> --
>> 2.33.0
>>
More information about the dri-devel
mailing list