[PATCH 02/20] mmc: dw_mmc-rockchip: switch to HWORD_UPDATE macro

[Nicolas Frattaroli]

The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.

Switch to the new HWORD_UPDATE macro in bitfield.h, which has error
checking. Instead of redefining the driver's HIWORD_UPDATE macro in this
case, replace the two only instances of it with the new macro, as I
could test that they result in an equivalent value.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
---
 drivers/mmc/host/dw_mmc-rockchip.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index baa23b51773127b4137f472581259b61649273a5..9e3d17becf65ffb60fe3d32d2cdec341fbd30b1e 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -5,6 +5,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/of_address.h>
@@ -24,8 +25,6 @@
 #define ROCKCHIP_MMC_DELAYNUM_OFFSET	2
 #define ROCKCHIP_MMC_DELAYNUM_MASK	(0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
 #define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC	60
-#define HIWORD_UPDATE(val, mask, shift) \
-		((val) << (shift) | (mask) << ((shift) + 16))
 
 static const unsigned int freqs[] = { 100000, 200000, 300000, 400000 };
 
@@ -148,9 +147,9 @@ static int rockchip_mmc_set_internal_phase(struct dw_mci *host, bool sample, int
 	raw_value |= nineties;
 
 	if (sample)
-		mci_writel(host, TIMING_CON1, HIWORD_UPDATE(raw_value, 0x07ff, 1));
+		mci_writel(host, TIMING_CON1, HWORD_UPDATE(GENMASK(11, 1), raw_value));
 	else
-		mci_writel(host, TIMING_CON0, HIWORD_UPDATE(raw_value, 0x07ff, 1));
+		mci_writel(host, TIMING_CON0, HWORD_UPDATE(GENMASK(11, 1), raw_value));
 
 	dev_dbg(host->dev, "set %s_phase(%d) delay_nums=%u actual_degrees=%d\n",
 		sample ? "sample" : "drv", degrees, delay_num,

-- 
2.49.0