[PATCH v2] drm/fbdev-client: Skip DRM clients if modesetting is absent
Thierry Reding
thierry.reding at gmail.com
Fri Jun 13 12:28:38 UTC 2025
From: Thierry Reding <treding at nvidia.com>
Recent generations of Tegra have moved the display components outside of
host1x, leading to a device that has no CRTCs attached and hence doesn't
support any of the modesetting functionality. When this is detected, the
driver clears the DRIVER_MODESET and DRIVER_ATOMIC flags for the device.
Unfortunately, this causes the following errors during boot:
[ 15.418958] ERR KERN drm drm: [drm] *ERROR* Failed to register client: -95
[ 15.425311] WARNING KERN drm drm: [drm] Failed to set up DRM client; error -95
These originate from the fbdev client checking for the presence of the
DRIVER_MODESET flag and returning -EOPNOTSUPP. However, if a driver does
not support DRIVER_MODESET this is entirely expected and the error isn't
helpful.
Prevent this misleading error message by setting up the DRM clients only
if modesetting is enabled.
Changes in v2:
- use DRIVER_MODESET check to avoid registering any clients
Reported-by: Jonathan Hunter <jonathanh at nvidia.com>
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
drivers/gpu/drm/clients/drm_client_setup.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/clients/drm_client_setup.c b/drivers/gpu/drm/clients/drm_client_setup.c
index e17265039ca8..e460ad354de2 100644
--- a/drivers/gpu/drm/clients/drm_client_setup.c
+++ b/drivers/gpu/drm/clients/drm_client_setup.c
@@ -2,6 +2,7 @@
#include <drm/clients/drm_client_setup.h>
#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_print.h>
@@ -31,6 +32,10 @@ MODULE_PARM_DESC(active,
*/
void drm_client_setup(struct drm_device *dev, const struct drm_format_info *format)
{
+ if (!drm_core_check_feature(dev, DRIVER_MODESET)) {
+ drm_dbg(dev, "driver does not support mode-setting, skipping DRM clients\n");
+ return;
+ }
#ifdef CONFIG_DRM_FBDEV_EMULATION
if (!strcmp(drm_client_default, "fbdev")) {
--
2.49.0
More information about the dri-devel
mailing list