[PATCH 1/3] i2c: stm32: fix the device used for the DMA map

[Clement LE GOFFIC]

On 6/26/25 10:43, Alain Volmat wrote:
> Hi Clément,
> 
> Oups, I was too fast.
> 
> there might be another place to correct in the driver, dma_unmap_single
> within the error handling of the function stm32_i2c_prep_dma_xfer.
> 
>     err:
>              dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len,
>                               dma->dma_data_dir);
> 
> Could you also correct this one as well ?
> 
> Alain

Hi Alain,

Oh yes you're right, I'll send a v2

Best regard,
Clément
> 
> 
> On Thu, Jun 26, 2025 at 10:37:51AM +0200, Alain Volmat wrote:
>> Hi Clément,
>>
>> On Mon, Jun 16, 2025 at 10:53:54AM +0200, Clément Le Goffic wrote:
>>> If the DMA mapping failed, it produced an error log with the wrong
>>> device name:
>>> "stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
>>> Fix this issue by replacing the dev with the I2C dev.
>>
>> Indeed, nice catch ! Thanks a lot !
>>
>>>
>>> Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
>>> Signed-off-by: Clément Le Goffic <clement.legoffic at foss.st.com>
>>> ---
>>>   drivers/i2c/busses/i2c-stm32.c | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
>>> index 157c64e27d0b..5e0b31aed774 100644
>>> --- a/drivers/i2c/busses/i2c-stm32.c
>>> +++ b/drivers/i2c/busses/i2c-stm32.c
>>> @@ -118,7 +118,7 @@ int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
>>>   	dma->dma_len = len;
>>>   	chan_dev = dma->chan_using->device->dev;
>>>   
>>> -	dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
>>> +	dma->dma_buf = dma_map_single(dev, buf, dma->dma_len,
>>>   				      dma->dma_data_dir);
>>>   	if (dma_mapping_error(chan_dev, dma->dma_buf)) {
>>>   		dev_err(dev, "DMA mapping failed\n");
>>>
>>> -- 
>>> 2.43.0
>>>
>>
>> Acked-by: Alain Volmat <alain.volmat at foss.st.com>
>>
>> Regards,
>> Alain