[PATCH v2 5/5] fbdev/simplefb: Add support for interconnect paths

[Javier Martinez Canillas]

Luca Weiss <luca.weiss at fairphone.com> writes:

> Some devices might require keeping an interconnect path alive so that
> the framebuffer continues working. Add support for that by setting the
> bandwidth requirements appropriately for all provided interconnect
> paths.
>
> Reviewed-by: Thomas Zimmermann <tzimmermann at suse.de>
> Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
> ---
>  drivers/video/fbdev/simplefb.c | 83 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
>

[...]

> +static void simplefb_detach_icc(void *res)
> +{
> +	struct simplefb_par *par = res;
> +	int i;
> +
> +	for (i = par->icc_count - 1; i >= 0; i--) {
> +		if (!IS_ERR_OR_NULL(par->icc_paths[i]))
> +			icc_put(par->icc_paths[i]);
> +	}
> +}
> +
> +static int simplefb_attach_icc(struct simplefb_par *par,
> +			       struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	int ret, count, i;
> +
> +	count = of_count_phandle_with_args(dev->of_node, "interconnects",
> +							 "#interconnect-cells");
> +	if (count < 0)
> +		return 0;
> +
> +	/* An interconnect path consists of two elements */
> +	if (count % 2) {
> +		dev_err(dev, "invalid interconnects value\n");
> +		return -EINVAL;
> +	}
> +	par->icc_count = count / 2;
> +
> +	par->icc_paths = devm_kcalloc(dev, par->icc_count,
> +				      sizeof(*par->icc_paths),
> +				      GFP_KERNEL);
> +	if (!par->icc_paths)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < par->icc_count; i++) {
> +		par->icc_paths[i] = of_icc_get_by_index(dev, i);
> +		if (IS_ERR_OR_NULL(par->icc_paths[i])) {
> +			ret = PTR_ERR(par->icc_paths[i]);
> +			if (ret == -EPROBE_DEFER)
> +				goto err;
> +			dev_err(dev, "failed to get interconnect path %u: %d\n", i, ret);
> +			continue;
> +		}
> +
> +		ret = icc_set_bw(par->icc_paths[i], 0, UINT_MAX);
> +		if (ret) {
> +			dev_err(dev, "failed to set interconnect bandwidth %u: %d\n", i, ret);
> +			continue;
> +		}
> +	}
> +
> +	return devm_add_action_or_reset(dev, simplefb_detach_icc, par);
> +
> +err:
> +	while (i) {
> +		--i;
> +		if (!IS_ERR_OR_NULL(par->icc_paths[i]))
> +			icc_put(par->icc_paths[i]);
> +	}
> +	return ret;
> +}
> +#else

These two functions contain the same logic that you are using in the
simpledrm driver. I wonder if could be made helpers so that the code
isn't duplicated in both drivers.

But in any case it could be a follow-up of your series I think.

Reviewed-by: Javier Martinez Canillas <javierm at redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat