[PATCH v3 6/8] drm/msm/dpu: allocate single CTL for DPU >= 5.0

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

Unlike previous generation, since DPU 5.0 it is possible to use just one
CTL to handle all INTF and WB blocks for a single output. And one has to
use single CTL to support bonded DSI config. Allocate single CTL for
these DPU versions.

Reviewed-by: Marijn Suijten <marijn.suijten at somainline.org>
Tested-by: Neil Armstrong <neil.armstrong at linaro.org> # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 28 +++++++++++++++-------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h |  2 ++
 2 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index 3efbba425ca6e037cb9646981ebb0f0354ffea8e..c72b968d58a65960605456e752278def2a21df7b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -53,6 +53,8 @@ int dpu_rm_init(struct drm_device *dev,
 	/* Clear, setup lists */
 	memset(rm, 0, sizeof(*rm));
 
+	rm->has_legacy_ctls = (cat->mdss_ver->core_major_ver < 5);
+
 	/* Interrogate HW catalog and create tracking items for hw blocks */
 	for (i = 0; i < cat->mixer_count; i++) {
 		struct dpu_hw_mixer *hw;
@@ -434,20 +436,19 @@ static int _dpu_rm_reserve_ctls(
 	int i = 0, j, num_ctls;
 	bool needs_split_display;
 
-	/*
-	 * For non-CWB mode, each hw_intf needs its own hw_ctl to program its
-	 * control path.
-	 *
-	 * Hardcode num_ctls to 1 if CWB is enabled because in CWB, both the
-	 * writeback and real-time encoders must be driven by the same control
-	 * path
-	 */
-	if (top->cwb_enabled)
-		num_ctls = 1;
-	else
+	if (rm->has_legacy_ctls) {
+		/*
+		 * TODO: check if there is a need for special handling if
+		 * DPU < 5.0 get CWB support.
+		 */
 		num_ctls = top->num_intf;
 
-	needs_split_display = _dpu_rm_needs_split_display(top);
+		needs_split_display = _dpu_rm_needs_split_display(top);
+	} else {
+		/* use single CTL */
+		num_ctls = 1;
+		needs_split_display = false;
+	}
 
 	for (j = 0; j < ARRAY_SIZE(rm->ctl_blks); j++) {
 		const struct dpu_hw_ctl *ctl;
@@ -465,7 +466,8 @@ static int _dpu_rm_reserve_ctls(
 
 		DPU_DEBUG("ctl %d caps 0x%lX\n", j + CTL_0, features);
 
-		if (needs_split_display != has_split_display)
+		if (rm->has_legacy_ctls &&
+		    needs_split_display != has_split_display)
 			continue;
 
 		ctl_idx[i] = j;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
index a19dbdb1b6f48ad708f0d512c2460d092856f52f..aa62966056d489d9c94c61f24051a2f3e7b7ed89 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
@@ -24,6 +24,7 @@ struct dpu_global_state;
  * @dspp_blks: array of dspp hardware resources
  * @hw_sspp: array of sspp hardware resources
  * @cdm_blk: cdm hardware resource
+ * @has_legacy_ctls: DPU uses pre-ACTIVE CTL blocks.
  */
 struct dpu_rm {
 	struct dpu_hw_blk *pingpong_blks[PINGPONG_MAX - PINGPONG_0];
@@ -37,6 +38,7 @@ struct dpu_rm {
 	struct dpu_hw_blk *dsc_blks[DSC_MAX - DSC_0];
 	struct dpu_hw_sspp *hw_sspp[SSPP_MAX - SSPP_NONE];
 	struct dpu_hw_blk *cdm_blk;
+	bool has_legacy_ctls;
 };
 
 struct dpu_rm_sspp_requirements {

-- 
2.39.5