(subset) [PATCH v4 0/7] Convert inno hdmi to drm bridge

[Heiko Stuebner]

On Tue, 22 Apr 2025 15:04:39 +0800, Andy Yan wrote:
> When preparing to convert the current inno hdmi driver into a
> bridge driver, I found that there are several issues currently
> existing with it:
> 
> 1. When the system starts up, the first time it reads the EDID, it
>    will fail. This is because RK3036 HDMI DDC bus requires it's PHY's
>    reference clock to be enabled first before normal DDC communication
>    can be carried out.
> 
> [...]

Applied, thanks!

[1/7] dt-bindings: display: rockchip,inno-hdmi: Fix Document of RK3036 compatible
      commit: c0673bb356557136954b6725bf5fe327b94c6233
[2/7] dt-bindings: display: rockchip,inno-hdmi: Document GRF for RK3036 HDMI
      commit: e0c93980d293b6e6eb7483fd5d665f84e725b518
[3/7] drm/rockchip: inno-hdmi: Simplify error handler with dev_err_probe
      commit: 31b4403c6c523a710205eadb9ca75c6cfe1478ab
[4/7] drm/rockchip: inno-hdmi: Fix video timing HSYNC/VSYNC polarity setting for rk3036
      commit: ad10b82c2bcac7f87ac6eaecfca33378b43425ee

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>