[PATCH v2 2/4] drm: panel: Add support for Renesas R61307 based MIPI DSI panel

Neil Armstrong neil.armstrong at linaro.org
Mon May 5 07:50:43 UTC 2025


On 03/05/2025 11:41, Svyatoslav Ryhel wrote:
> R61307 is liquid crystal driver for high-definition amorphous silicon
> (a-Si) panels and is ideal for tablets and smartphones.
> 
> Supported compatibles are:
> - hit,tx13d100vm0eaa
> - koe,tx13d100vm0eaa
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
> ---
>   drivers/gpu/drm/panel/Kconfig                |  13 +
>   drivers/gpu/drm/panel/Makefile               |   1 +
>   drivers/gpu/drm/panel/panel-renesas-r61307.c | 327 +++++++++++++++++++
>   3 files changed, 341 insertions(+)
>   create mode 100644 drivers/gpu/drm/panel/panel-renesas-r61307.c
> 

<snip>

> +static int renesas_r61307_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct renesas_r61307 *priv;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->vcc_supply = devm_regulator_get(dev, "vcc");
> +	if (IS_ERR(priv->vcc_supply))
> +		return dev_err_probe(dev, PTR_ERR(priv->vcc_supply),
> +				     "Failed to get vcc-supply\n");
> +
> +	priv->iovcc_supply = devm_regulator_get(dev, "iovcc");
> +	if (IS_ERR(priv->iovcc_supply))
> +		return dev_err_probe(dev, PTR_ERR(priv->iovcc_supply),
> +				     "Failed to get iovcc-supply\n");
> +
> +	priv->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +						   GPIOD_OUT_HIGH);
> +	if (IS_ERR(priv->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
> +				     "Failed to get reset gpios\n");
> +
> +	if (device_property_read_bool(dev, "renesas,inversion"))
> +		priv->inversion = true;
> +
> +	if (device_property_read_bool(dev, "renesas,contrast"))
> +		priv->dig_cont_adj = true;
> +
> +	priv->gamma = 0;
> +	device_property_read_u32(dev, "renesas,gamma", &priv->gamma);
> +
> +	priv->dsi = dsi;
> +	mipi_dsi_set_drvdata(dsi, priv);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> +			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
> +
> +	drm_panel_init(&priv->panel, dev, &renesas_r61307_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);

Please switch to devm_drm_panel_alloc()

> +
> +	ret = drm_panel_of_backlight(&priv->panel);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to get backlight\n");
> +
> +	drm_panel_add(&priv->panel);
> +
<snip>

With that:
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>


More information about the dri-devel mailing list