[PATCH V9 22/24] arm64: dts: allwinner: h616: add LCD and LVDS pins

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

The Allwinner H616 (and its H618, H700 and T507 package variants with
the same die) have 28 video output pins for RGB/SPI and LVDS display.
These are in GPIO Bank D and are multiplexed.

In RGB mode, pins PD0-PD23 are for 24-bit RGB pixel output, pins
PD24-PD27 are for clock, DE, HSYNC and VSYNC.

In LVDS mode, pins PD0-PD9 are for LVDS0 and LVDS1, and can be
configured by the H616 display engine for either one high-resolution
(dual link) or two low resolution displays.

Add device tree nodes for the LCD, LVDS0, and LVDS1 pins.

Signed-off-by: Jernej Skrabec <jernej.skrabec at gmail.com>
Signed-off-by: Ryan Walklin <ryan at testtoast.com>
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 129ce78ae5f3..3d8b412afb88 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -325,6 +325,32 @@ ir_rx_pin: ir-rx-pin {
 				function = "ir_rx";
 			};
 
+			/omit-if-no-ref/
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			/omit-if-no-ref/
+			lvds0_pins: lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lvds1_pins: lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
-- 
2.43.0