[PATCH v4 2/2] dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml

[Chaoyi Chen]

Hi Krzysztof,

On 2025/5/19 14:16, Krzysztof Kozlowski wrote:
> On 19/05/2025 03:26, Chaoyi Chen wrote:
>> +maintainers:
>> +  - Andy Yan <andy.yan at rock-chip.com>
>> +  - Heiko Stuebner <heiko at sntech.de>
>> +  - Sandy Huang <hjc at rock-chips.com>
>> +
>> +allOf:
>> +  - $ref: /schemas/sound/dai-common.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: rockchip,rk3399-cdn-dp
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    items:
>> +      - description: DP core work clock
>> +      - description: APB clock
>> +      - description: SPDIF interface clock
>> +      - description: GRF clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: core-clk
>> +      - const: pclk
>> +      - const: spdif
>> +      - const: grf
>> +
>> +  extcon:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    items:
>> +      maxItems: 1
>> +    maxItems: 2
> Instead of this, list the items. Old binding said only "specifier", so
> this is technically a change, which should be explained in commit msg.

Will fix in v5.


>
>> +    description:
>> +      List of phandle to the extcon device providing the cable state for the DP PHY.
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  phys:
>> +    items:
>> +      maxItems: 1
>> +    maxItems: 2
>> +    description: |
>> +      List of phandle to the PHY device for DP output.
>> +      RK3399 have two DP-TPYEC PHY, specifying one PHY which want to use,
>> +      or specify two PHYs here to let the driver determine which PHY to use.
>
> You do not allow one phy, so your description is not accurate. OTOH,
> original binding did not allow two phandles, so that's another change in
> the binding. You need to document all changes done to the binding in the
> commit msg.

Oh, the original binding example use two phandles. I think only one PHY 
can also pass the dtb check here, or maybe I'm missing something else?


>
>> +
>> +  ports:
>> +    $ref: /schemas/graph.yaml#/properties/ports
>> +
>> +    properties:
>> +      port at 0:
>> +        $ref: /schemas/graph.yaml#/properties/port
>> +        description: Input of the CDN DP
>> +        properties:
>> +          endpoint at 0:
>> +            description: Connection to the VOPB
>> +          endpoint at 1:
>> +            description: Connection to the VOPL
>> +      port at 1:
>> +        $ref: /schemas/graph.yaml#/properties/port
>> +        description: Output of the CDN DP
>> +
>> +    required:
>> +      - port at 0
>> +      - port at 1
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  resets:
>> +    maxItems: 4
>> +
>> +  reset-names:
>> +    items:
>> +      - const: spdif
>> +      - const: dptx
>> +      - const: apb
>> +      - const: core
>> +
>> +  rockchip,grf:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description:
>> +      Phandle to GRF register to control HPD.
>> +
>> +  "#sound-dai-cells":
>> +    const: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - interrupts
>> +  - phys
>> +  - ports
>> +  - resets
>> +  - reset-names
>> +  - rockchip,grf
>
> sound-dai-cells was a required property.
>
Okay, will add in v5.