[PATCH v4 2/2] dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml

[Chaoyi Chen]

Hi Krzysztof,

On 2025/5/19 16:23, Krzysztof Kozlowski wrote:
> On Mon, May 19, 2025 at 02:56:03PM GMT, Chaoyi Chen wrote:
>> Hi Krzysztof,
>>
>> On 2025/5/19 14:16, Krzysztof Kozlowski wrote:
>>> On 19/05/2025 03:26, Chaoyi Chen wrote:
>>>> +maintainers:
>>>> +  - Andy Yan <andy.yan at rock-chip.com>
>>>> +  - Heiko Stuebner <heiko at sntech.de>
>>>> +  - Sandy Huang <hjc at rock-chips.com>
>>>> +
>>>> +allOf:
>>>> +  - $ref: /schemas/sound/dai-common.yaml#
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    items:
>>>> +      - const: rockchip,rk3399-cdn-dp
>>>> +
>>>> +  reg:
>>>> +    maxItems: 1
>>>> +
>>>> +  clocks:
>>>> +    items:
>>>> +      - description: DP core work clock
>>>> +      - description: APB clock
>>>> +      - description: SPDIF interface clock
>>>> +      - description: GRF clock
>>>> +
>>>> +  clock-names:
>>>> +    items:
>>>> +      - const: core-clk
>>>> +      - const: pclk
>>>> +      - const: spdif
>>>> +      - const: grf
>>>> +
>>>> +  extcon:
>>>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>>>> +    items:
>>>> +      maxItems: 1
>>>> +    maxItems: 2
>>> Instead of this, list the items. Old binding said only "specifier", so
>>> this is technically a change, which should be explained in commit msg.
>> Will fix in v5.
>>
>>
>>>> +    description:
>>>> +      List of phandle to the extcon device providing the cable state for the DP PHY.
>>>> +
>>>> +  interrupts:
>>>> +    maxItems: 1
>>>> +
>>>> +  phys:
>>>> +    items:
>>>> +      maxItems: 1
>>>> +    maxItems: 2
>>>> +    description: |
>>>> +      List of phandle to the PHY device for DP output.
>>>> +      RK3399 have two DP-TPYEC PHY, specifying one PHY which want to use,
>>>> +      or specify two PHYs here to let the driver determine which PHY to use.
>>> You do not allow one phy, so your description is not accurate. OTOH,
>>> original binding did not allow two phandles, so that's another change in
>>> the binding. You need to document all changes done to the binding in the
>>> commit msg.
>> Oh, the original binding example use two phandles. I think only one PHY can
> Example is not the binding, just an example.
>
>> also pass the dtb check here, or maybe I'm missing something else?
> You think or you tested it? What is the minItems value? 2, so even if
> this works it's rather a bug in dtschema.

Yes I tested it. Both of "phys = <&tcphy0_dp>", "phys = <&tcphy0_dp>, 
<&tcphy1_dp>" pass the dtb check.


>
> Also, inner maxItems:1 is not really correct. Why can't this work with
> different phy providers?

I'll see what other bindings do. Thanks for the clarification!