[PATCH] drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rate

[Dmitry Baryshkov]

On Tue, May 20, 2025 at 01:13:26PM +0200, Krzysztof Kozlowski wrote:
> Driver unconditionally saves current state on first init in
> dsi_pll_10nm_init(), but does not save the VCO rate, only some of the
> divider registers.  The state is then restored during probe/enable via
> msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() ->
> dsi_10nm_pll_restore_state().
> 
> Restoring calls dsi_pll_10nm_vco_set_rate() with
> pll_10nm->vco_current_rate=0, which basically overwrites existing rate of
> VCO and messes with clock hierarchy, by setting frequency to 0 to clock
> tree.  This makes anyway little sense - VCO rate was not saved, so
> should not be restored.
> 
> If PLL was not configured configure it to minimum rate to avoid glitches
> and configuring entire in clock hierarchy to 0 Hz.
> 
> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
> Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Fixes?

> 
> ---
> 
> Not tested on hardware.
> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> index 9812b4d69197..af2e30f3f842 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> @@ -704,6 +704,13 @@ static int dsi_pll_10nm_init(struct msm_dsi_phy *phy)
>  	/* TODO: Remove this when we have proper display handover support */
>  	msm_dsi_phy_pll_save_state(phy);
>  
> +	/*
> +	 * Store also proper vco_current_rate, because its value will be used in
> +	 * dsi_10nm_pll_restore_state().
> +	 */
> +	if (!dsi_pll_10nm_vco_recalc_rate(&pll_10nm->clk_hw, VCO_REF_CLK_RATE))
> +		pll_10nm->vco_current_rate = pll_10nm->phy->cfg->min_pll_rate;
> +
>  	return 0;
>  }
>  
> -- 
> 2.45.2
> 

-- 
With best wishes
Dmitry