[PATCH v5 06/12] drm: renesas: rz-du: mipi_dsi: Add OF data support
Lad, Prabhakar
prabhakar.csengg at gmail.com
Wed May 21 13:08:13 UTC 2025
Hi Laurent,
Thank you for the review.
On Tue, May 20, 2025 at 3:22 PM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, May 12, 2025 at 07:23:24PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> >
> > In preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch
> > introduces a mechanism to pass SoC-specific information via OF data in the
> > DSI driver. This enables the driver to adapt dynamically to various
> > SoC-specific requirements without hardcoding configurations.
> >
> > The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one
> > on the RZ/G2L SoC. While the LINK registers are shared between the two
> > SoCs, the D-PHY registers differ. Also the VCLK range differs on both these
> > SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is
> > introduced and as now passed as OF data.
> >
> > These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by
> > allowing SoC-specific data to be passed through OF.
> >
> > Co-developed-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > Reviewed-by: Biju Das <biju.das.jz at bp.renesas.com>
> > ---
> > v4->v5:
> > - Dropped RZ_MIPI_DSI_FEATURE_DPHY_RST feature flag
> > - Added Reviewed tag from Biju
> >
> > v3->v4:
> > - No changes
> >
> > v2->v3:
> > - Dropped !dsi->info check in rzg2l_mipi_dsi_probe() as it is not needed.
> >
> > v1->v2:
> > - Added DPHY_RST as feature flag
> > ---
> > .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 51 ++++++++++++++-----
> > .../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h | 2 -
> > 2 files changed, 38 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > index 3f6988303e63..00c2bc6e9d6c 100644
> > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > @@ -28,10 +28,23 @@
> >
> > #include "rzg2l_mipi_dsi_regs.h"
> >
> > +struct rzg2l_mipi_dsi;
> > +
> > +struct rzg2l_mipi_dsi_hw_info {
> > + int (*dphy_init)(struct rzg2l_mipi_dsi *dsi, unsigned long hsfreq);
> > + void (*dphy_exit)(struct rzg2l_mipi_dsi *dsi);
> > + u32 phy_reg_offset;
> > + u32 link_reg_offset;
> > + unsigned long max_dclk;
> > + unsigned long min_dclk;
>
> I'd put min before max.
>
Sure, I'll swap them (and below).
Cheers,
Prabhakar
> > +};
> > +
> > struct rzg2l_mipi_dsi {
> > struct device *dev;
> > void __iomem *mmio;
> >
> > + const struct rzg2l_mipi_dsi_hw_info *info;
> > +
> > struct reset_control *rstc;
> > struct reset_control *arstc;
> > struct reset_control *prstc;
> > @@ -164,22 +177,22 @@ static const struct rzg2l_mipi_dsi_timings rzg2l_mipi_dsi_global_timings[] = {
> >
> > static void rzg2l_mipi_dsi_phy_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
> > {
> > - iowrite32(data, dsi->mmio + reg);
> > + iowrite32(data, dsi->mmio + dsi->info->phy_reg_offset + reg);
> > }
> >
> > static void rzg2l_mipi_dsi_link_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
> > {
> > - iowrite32(data, dsi->mmio + LINK_REG_OFFSET + reg);
> > + iowrite32(data, dsi->mmio + dsi->info->link_reg_offset + reg);
> > }
> >
> > static u32 rzg2l_mipi_dsi_phy_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
> > {
> > - return ioread32(dsi->mmio + reg);
> > + return ioread32(dsi->mmio + dsi->info->phy_reg_offset + reg);
> > }
> >
> > static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
> > {
> > - return ioread32(dsi->mmio + LINK_REG_OFFSET + reg);
> > + return ioread32(dsi->mmio + dsi->info->link_reg_offset + reg);
> > }
> >
> > /* -----------------------------------------------------------------------------
> > @@ -294,7 +307,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> > mode->clock * MILLI, vclk_rate);
> > hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
> >
> > - ret = rzg2l_mipi_dsi_dphy_init(dsi, hsfreq);
> > + ret = dsi->info->dphy_init(dsi, hsfreq);
> > if (ret < 0)
> > goto err_phy;
> >
> > @@ -337,7 +350,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> > return 0;
> >
> > err_phy:
> > - rzg2l_mipi_dsi_dphy_exit(dsi);
> > + dsi->info->dphy_exit(dsi);
> > pm_runtime_put(dsi->dev);
> >
> > return ret;
> > @@ -345,7 +358,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> >
> > static void rzg2l_mipi_dsi_stop(struct rzg2l_mipi_dsi *dsi)
> > {
> > - rzg2l_mipi_dsi_dphy_exit(dsi);
> > + dsi->info->dphy_exit(dsi);
> > pm_runtime_put(dsi->dev);
> > }
> >
> > @@ -587,10 +600,12 @@ rzg2l_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge,
> > const struct drm_display_info *info,
> > const struct drm_display_mode *mode)
> > {
> > - if (mode->clock > 148500)
> > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge);
> > +
> > + if (mode->clock > dsi->info->max_dclk)
> > return MODE_CLOCK_HIGH;
> >
> > - if (mode->clock < 5803)
> > + if (mode->clock < dsi->info->min_dclk)
> > return MODE_CLOCK_LOW;
> >
> > return MODE_OK;
> > @@ -716,6 +731,8 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
> > platform_set_drvdata(pdev, dsi);
> > dsi->dev = &pdev->dev;
> >
> > + dsi->info = of_device_get_match_data(&pdev->dev);
> > +
> > ret = drm_of_get_data_lanes_count_ep(dsi->dev->of_node, 1, 0, 1, 4);
> > if (ret < 0)
> > return dev_err_probe(dsi->dev, ret,
> > @@ -759,13 +776,13 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
> > * mode->clock and format are not available. So initialize DPHY with
> > * timing parameters for 80Mbps.
> > */
> > - ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000000);
> > + ret = dsi->info->dphy_init(dsi, 80000000);
> > if (ret < 0)
> > goto err_phy;
> >
> > txsetr = rzg2l_mipi_dsi_link_read(dsi, TXSETR);
> > dsi->num_data_lanes = min(((txsetr >> 16) & 3) + 1, num_data_lanes);
> > - rzg2l_mipi_dsi_dphy_exit(dsi);
> > + dsi->info->dphy_exit(dsi);
> > pm_runtime_put(dsi->dev);
> >
> > /* Initialize the DRM bridge. */
> > @@ -782,7 +799,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
> > return 0;
> >
> > err_phy:
> > - rzg2l_mipi_dsi_dphy_exit(dsi);
> > + dsi->info->dphy_exit(dsi);
> > pm_runtime_put(dsi->dev);
> > err_pm_disable:
> > pm_runtime_disable(dsi->dev);
> > @@ -797,8 +814,16 @@ static void rzg2l_mipi_dsi_remove(struct platform_device *pdev)
> > pm_runtime_disable(&pdev->dev);
> > }
> >
> > +static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
> > + .dphy_init = rzg2l_mipi_dsi_dphy_init,
> > + .dphy_exit = rzg2l_mipi_dsi_dphy_exit,
> > + .link_reg_offset = 0x10000,
> > + .max_dclk = 148500,
> > + .min_dclk = 5803,
>
> Here too.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
>
> > +};
> > +
> > static const struct of_device_id rzg2l_mipi_dsi_of_table[] = {
> > - { .compatible = "renesas,rzg2l-mipi-dsi" },
> > + { .compatible = "renesas,rzg2l-mipi-dsi", .data = &rzg2l_mipi_dsi_info, },
> > { /* sentinel */ }
> > };
> >
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
> > index 1dbc16ec64a4..16efe4dc59f4 100644
> > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h
> > @@ -41,8 +41,6 @@
> > #define DSIDPHYTIM3_THS_ZERO(x) ((x) << 0)
> >
> > /* --------------------------------------------------------*/
> > -/* Link Registers */
> > -#define LINK_REG_OFFSET 0x10000
> >
> > /* Link Status Register */
> > #define LINKSR 0x10
>
> --
> Regards,
>
> Laurent Pinchart
More information about the dri-devel
mailing list