[PATCH v5 05/12] drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculation
Biju Das
biju.das.jz at bp.renesas.com
Wed May 21 13:09:18 UTC 2025
> -----Original Message-----
> From: Lad, Prabhakar <prabhakar.csengg at gmail.com>
> Sent: Wednesday, May 21, 2025 2:05 PM
> Subject: Re: [PATCH v5 05/12] drm: renesas: rz-du: mipi_dsi: Use VCLK for
> HSFREQ calculation
>
> Hi Laurent,
>
> Thank you for the review.
>
> On Tue, May 20, 2025 at 3:16 PM Laurent Pinchart
> <laurent.pinchart at ideasonboard.com> wrote:
> >
> > Hi Prabhakar,
> >
> > On Mon, May 12, 2025 at 07:23:23PM +0100, Prabhakar wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > >
> > > Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the
> > > actual VCLK rate instead of the mode clock. The relationship between
> > > HSCLK and VCLK is:
> > >
> > > vclk * bpp <= hsclk * 8 * lanes
> > >
> > > Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring
> > > that HSFREQ accurately reflects the clock rate set in hardware,
> > > leading to better precision in data transmission.
> > >
> > > Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise
> > > division when computing `hsfreq`. Also, update unit conversions to
> > > use correct scaling factors for better clarity and correctness.
> > >
> > > Since `clk_get_rate()` returns the clock rate in Hz, update the
> > > HSFREQ threshold comparisons to use Hz instead of kHz to ensure
> correct behavior.
> > >
> > > Co-developed-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> > > Signed-off-by: Lad Prabhakar
> > > <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > > Reviewed-by: Biju Das <biju.das.jz at bp.renesas.com>
> > > ---
> > > v4->v5:
> > > - Added dev_info() to print the VCLK rate if it doesn't match the
> > > requested rate.
> > > - Added Reviewed-by tag from Biju
> > >
> > > v3->v4:
> > > - Used MILLI instead of KILO
> > >
> > > v2->v3:
> > > - No changes
> > >
> > > v1->v2:
> > > - No changes
> > > ---
> > > .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 30 +++++++++++-------
> -
> > > 1 file changed, 18 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > index c5f698cd74f1..3f6988303e63 100644
> > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> > > @@ -8,6 +8,7 @@
> > > #include <linux/delay.h>
> > > #include <linux/io.h>
> > > #include <linux/iopoll.h>
> > > +#include <linux/math.h>
> > > #include <linux/module.h>
> > > #include <linux/of.h>
> > > #include <linux/of_graph.h>
> > > @@ -15,6 +16,7 @@
> > > #include <linux/pm_runtime.h>
> > > #include <linux/reset.h>
> > > #include <linux/slab.h>
> > > +#include <linux/units.h>
> > >
> > > #include <drm/drm_atomic.h>
> > > #include <drm/drm_atomic_helper.h>
> > > @@ -199,7 +201,7 @@ static int rzg2l_mipi_dsi_dphy_init(struct
> rzg2l_mipi_dsi *dsi,
> > > /* All DSI global operation timings are set with recommended
> setting */
> > > for (i = 0; i < ARRAY_SIZE(rzg2l_mipi_dsi_global_timings); ++i)
> {
> > > dphy_timings = &rzg2l_mipi_dsi_global_timings[i];
> > > - if (hsfreq <= dphy_timings->hsfreq_max)
> > > + if (hsfreq <= (dphy_timings->hsfreq_max * MILLI))
> >
> > No need for the inner parentheses.
> >
> Agreed, I will drop it.
>
> > > break;
> > > }
> > >
> > > @@ -258,7 +260,7 @@ static void rzg2l_mipi_dsi_dphy_exit(struct
> > > rzg2l_mipi_dsi *dsi) static int rzg2l_mipi_dsi_startup(struct
> rzg2l_mipi_dsi *dsi,
> > > const struct drm_display_mode *mode)
> > > {
> > > - unsigned long hsfreq;
> > > + unsigned long hsfreq, vclk_rate;
> > > unsigned int bpp;
> > > u32 txsetr;
> > > u32 clstptsetr;
> > > @@ -269,6 +271,12 @@ static int rzg2l_mipi_dsi_startup(struct
> rzg2l_mipi_dsi *dsi,
> > > u32 golpbkt;
> > > int ret;
> > >
> > > + ret = pm_runtime_resume_and_get(dsi->dev);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + clk_set_rate(dsi->vclk, mode->clock * MILLI);
> > > +
> > > /*
> > > * Relationship between hsclk and vclk must follow
> > > * vclk * bpp = hsclk * 8 * lanes @@ -280,13 +288,11 @@ static
> > > int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> > > * hsclk(bit) = hsclk(byte) * 8 = hsfreq
> > > */
> > > bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> > > - hsfreq = (mode->clock * bpp) / dsi->lanes;
> > > -
> > > - ret = pm_runtime_resume_and_get(dsi->dev);
> > > - if (ret < 0)
> > > - return ret;
> > > -
> > > - clk_set_rate(dsi->vclk, mode->clock * 1000);
> > > + vclk_rate = clk_get_rate(dsi->vclk);
> > > + if (vclk_rate != mode->clock * MILLI)
> > > + dev_info(dsi->dev, "Requested vclk rate %lu, actual %lu
> mismatch\n",
> > > + mode->clock * MILLI, vclk_rate);
> >
> > There's a high risk that the requested rate won't be achieved exactly.
> > Do we really want to print a non-debug message to the kernel log every
> > time ?
> >
> Actually Biju requested the above.
Yes, I was looking for dev_dbg.
Cheers,
Biju
>
> > > + hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
> >
> > I doubt DIV_ROUND_CLOSEST_ULL() will make any difference in practice
> > given that you can't have more than 4 lanes, but that's fine.
> >
> Thanks, I'll check on it.
>
> Cheers,
> Prabhakar
> > >
> > > ret = rzg2l_mipi_dsi_dphy_init(dsi, hsfreq);
> > > if (ret < 0)
> > > @@ -304,12 +310,12 @@ static int rzg2l_mipi_dsi_startup(struct
> rzg2l_mipi_dsi *dsi,
> > > * - data lanes: maximum 4 lanes
> > > * Therefore maximum hsclk will be 891 Mbps.
> > > */
> > > - if (hsfreq > 445500) {
> > > + if (hsfreq > 445500000) {
> > > clkkpt = 12;
> > > clkbfht = 15;
> > > clkstpt = 48;
> > > golpbkt = 75;
> > > - } else if (hsfreq > 250000) {
> > > + } else if (hsfreq > 250000000) {
> > > clkkpt = 7;
> > > clkbfht = 8;
> > > clkstpt = 27;
> > > @@ -753,7 +759,7 @@ static int rzg2l_mipi_dsi_probe(struct
> platform_device *pdev)
> > > * mode->clock and format are not available. So initialize DPHY
> with
> > > * timing parameters for 80Mbps.
> > > */
> > > - ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000);
> > > + ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000000);
> > > if (ret < 0)
> > > goto err_phy;
> > >
> >
> > --
> > Regards,
> >
> > Laurent Pinchart
More information about the dri-devel
mailing list