[PATCH v4 3/5] phy: qcom-uniphy: add more registers from display PHYs

[neil.armstrong at linaro.org]

On 20/05/2025 22:44, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> 
> Import register definitions from 28nm DSI and HDMI PHYs, adding more UNI
> PHY registers.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-uniphy.h | 33 +++++++++++++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy.h b/drivers/phy/qualcomm/phy-qcom-uniphy.h
> index e5b79a4dc270f25d8979f51bf4acd6c76998032e..ce782018124b5431ee647575289c963d8fd0de1f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-uniphy.h
> +++ b/drivers/phy/qualcomm/phy-qcom-uniphy.h
> @@ -8,8 +8,19 @@
>   
>   /* PHY registers */
>   #define UNIPHY_PLL_REFCLK_CFG		0x000
> +#define UNIPHY_PLL_POSTDIV1_CFG		0x004
> +#define UNIPHY_PLL_CHGPUMP_CFG		0x008
> +#define UNIPHY_PLL_VCOLPF_CFG		0x00c
> +#define UNIPHY_PLL_VREG_CFG		0x010
>   #define UNIPHY_PLL_PWRGEN_CFG		0x014
> +#define UNIPHY_PLL_DMUX_CFG		0x018
> +#define UNIPHY_PLL_AMUX_CFG		0x01c
>   #define UNIPHY_PLL_GLB_CFG		0x020
> +#define UNIPHY_PLL_POSTDIV2_CFG		0x024
> +#define UNIPHY_PLL_POSTDIV3_CFG		0x028
> +#define UNIPHY_PLL_LPFR_CFG		0x02c
> +#define UNIPHY_PLL_LPFC1_CFG		0x030
> +#define UNIPHY_PLL_LPFC2_CFG		0x034
>   #define UNIPHY_PLL_SDM_CFG0		0x038
>   #define UNIPHY_PLL_SDM_CFG1		0x03c
>   #define UNIPHY_PLL_SDM_CFG2		0x040
> @@ -22,11 +33,33 @@
>   #define UNIPHY_PLL_LKDET_CFG0		0x05c
>   #define UNIPHY_PLL_LKDET_CFG1		0x060
>   #define UNIPHY_PLL_LKDET_CFG2		0x064
> +#define UNIPHY_PLL_TEST_CFG		0x068
>   #define UNIPHY_PLL_CAL_CFG0		0x06c
> +#define UNIPHY_PLL_CAL_CFG1		0x070
> +#define UNIPHY_PLL_CAL_CFG2		0x074
> +#define UNIPHY_PLL_CAL_CFG3		0x078
> +#define UNIPHY_PLL_CAL_CFG4		0x07c
> +#define UNIPHY_PLL_CAL_CFG5		0x080
> +#define UNIPHY_PLL_CAL_CFG6		0x084
> +#define UNIPHY_PLL_CAL_CFG7		0x088
>   #define UNIPHY_PLL_CAL_CFG8		0x08c
>   #define UNIPHY_PLL_CAL_CFG9		0x090
>   #define UNIPHY_PLL_CAL_CFG10		0x094
>   #define UNIPHY_PLL_CAL_CFG11		0x098
> +#define UNIPHY_PLL_EFUSE_CFG		0x09c
> +#define UNIPHY_PLL_DEBUG_BUS_SEL	0x0a0
> +#define UNIPHY_PLL_CTRL_42		0x0a4
> +#define UNIPHY_PLL_CTRL_43		0x0a8
> +#define UNIPHY_PLL_CTRL_44		0x0ac
> +#define UNIPHY_PLL_CTRL_45		0x0b0
> +#define UNIPHY_PLL_CTRL_46		0x0b4
> +#define UNIPHY_PLL_CTRL_47		0x0b8
> +#define UNIPHY_PLL_CTRL_48		0x0bc
>   #define UNIPHY_PLL_STATUS		0x0c0
> +#define UNIPHY_PLL_DEBUG_BUS0		0x0c4
> +#define UNIPHY_PLL_DEBUG_BUS1		0x0c8
> +#define UNIPHY_PLL_DEBUG_BUS2		0x0cc
> +#define UNIPHY_PLL_DEBUG_BUS3		0x0d0
> +#define UNIPHY_PLL_CTRL_54		0x0d4
>   
>   #endif
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>