[PATCH v4 1/5] drm/msm/hdmi: switch to generic PHY subsystem

[Dmitry Baryshkov]

On Thu, May 22, 2025 at 09:38:34AM +0200, neil.armstrong at linaro.org wrote:
> On 20/05/2025 22:44, Dmitry Baryshkov wrote:
> > From: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > 
> > Change the MSM HDMI driver to use generic PHY subsystem. Moving PHY
> > drivers allows better code sharing with the rest of the PHY system.
> > 
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
> > ---
> >   drivers/gpu/drm/msm/Makefile                     |   7 -
> >   drivers/gpu/drm/msm/hdmi/hdmi.c                  |  58 +-
> >   drivers/gpu/drm/msm/hdmi/hdmi.h                  |  80 +--
> >   drivers/gpu/drm/msm/hdmi/hdmi_bridge.c           |  32 +-
> >   drivers/gpu/drm/msm/hdmi/hdmi_phy.c              | 225 -------
> >   drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c         |  51 --
> >   drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c         | 765 ----------------------
> >   drivers/gpu/drm/msm/hdmi/hdmi_phy_8998.c         | 769 -----------------------
> >   drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c         | 141 -----
> >   drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c         |  44 --
> >   drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c         | 458 --------------
> >   drivers/phy/qualcomm/Kconfig                     |  21 +
> >   drivers/phy/qualcomm/Makefile                    |  14 +
> >   drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c       |  71 +++
> >   drivers/phy/qualcomm/phy-qcom-hdmi-28lpm.c       | 441 +++++++++++++
> >   drivers/phy/qualcomm/phy-qcom-hdmi-45nm.c        | 186 ++++++
> >   drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c      | 212 +++++++
> >   drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h      |  81 +++
> >   drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c    | 185 ++++++
> >   drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c | 442 +++++++++++++
> >   drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8998.c | 495 +++++++++++++++
> >   drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h         |  77 +++
> >   22 files changed, 2259 insertions(+), 2596 deletions(-)
> > 
> 
> <snip>
> 
> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> > index 53a7ce8cc7bc7b6278eae2cbc42c3fda8d697f6d..1a00c26c1b40fc81623c9fb22ba25f448c27bffb 100644
> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> > @@ -5,6 +5,7 @@
> >    */
> >   #include <linux/delay.h>
> > +#include <linux/phy/phy.h>
> >   #include <drm/drm_bridge_connector.h>
> >   #include <drm/drm_edid.h>
> >   #include <drm/display/drm_hdmi_helper.h>
> > @@ -286,11 +287,12 @@ static void msm_hdmi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
> >   {
> >   	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >   	struct hdmi *hdmi = hdmi_bridge->hdmi;
> > -	struct hdmi_phy *phy = hdmi->phy;
> >   	struct drm_encoder *encoder = bridge->encoder;
> >   	struct drm_connector *connector;
> >   	struct drm_connector_state *conn_state;
> >   	struct drm_crtc_state *crtc_state;
> > +	union phy_configure_opts phy_opts;
> > +	int ret;
> >   	DBG("power up");
> > @@ -304,7 +306,7 @@ static void msm_hdmi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
> >   	mutex_lock(&hdmi->state_mutex);
> >   	if (!hdmi->power_on) {
> > -		msm_hdmi_phy_resource_enable(phy);
> > +		phy_init(hdmi->phy);
> >   		msm_hdmi_power_on(bridge);
> >   		hdmi->power_on = true;
> >   	}
> > @@ -315,7 +317,23 @@ static void msm_hdmi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
> >   	drm_atomic_helper_connector_hdmi_update_infoframes(connector, state);
> > -	msm_hdmi_phy_powerup(phy, hdmi->pixclock);
> > +	phy_opts.hdmi.tmds_char_rate = conn_state->hdmi.tmds_char_rate;
> > +	phy_opts.hdmi.bpc = 8;
> > +	phy_configure(hdmi->phy, &phy_opts);
> > +
> > +	ret = phy_power_on(hdmi->phy);
> > +	if (WARN_ON(ret))
> > +		return;
> > +
> > +	if (hdmi->extp_clk) {
> > +		ret = clk_set_rate(hdmi->extp_clk, hdmi->pixclock);
> > +		if (ret)
> > +			DRM_DEV_ERROR(bridge->dev->dev, "failed to set extp clk rate: %d\n", ret);
> > +
> > +		ret = clk_prepare_enable(hdmi->extp_clk);
> > +		if (ret)
> > +			DRM_DEV_ERROR(bridge->dev->dev, "failed to enable extp clk: %d\n", ret);
> > +	}
> 
> Why do you again set the extp_clk since it's already set & enabled in msm_hdmi_power_on() ?
> 
> Perhaps I missed a change but it's like that on next-20250521

Yes. And it was a part of the series beforehand. I will check, why it
was required or I will drop it.

> 
> >   	msm_hdmi_set_mode(hdmi, true);
> > @@ -328,7 +346,6 @@ static void msm_hdmi_bridge_atomic_post_disable(struct drm_bridge *bridge,
> >   {
> >   	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >   	struct hdmi *hdmi = hdmi_bridge->hdmi;
> > -	struct hdmi_phy *phy = hdmi->phy;
> >   	if (hdmi->hdcp_ctrl)
> >   		msm_hdmi_hdcp_off(hdmi->hdcp_ctrl);
> > @@ -339,14 +356,17 @@ static void msm_hdmi_bridge_atomic_post_disable(struct drm_bridge *bridge,
> >   	mutex_lock(&hdmi->state_mutex);
> >   	msm_hdmi_set_mode(hdmi, hdmi->hpd_enabled);
> > -	msm_hdmi_phy_powerdown(phy);
> > +	if (hdmi->extp_clk)
> > +		clk_disable_unprepare(hdmi->extp_clk);
> > +
> > +	phy_power_off(hdmi->phy);
> >   	if (hdmi->power_on) {
> >   		power_off(bridge);
> >   		hdmi->power_on = false;
> >   		if (hdmi->connector->display_info.is_hdmi)
> >   			msm_hdmi_audio_update(hdmi);
> > -		msm_hdmi_phy_resource_disable(phy);
> > +		phy_exit(hdmi->phy);
> >   	}
> >   	mutex_unlock(&hdmi->state_mutex);
> >   }
> <snip>
> 
> Otherwise it looks fine even there's a lot to digest and hard to figure out
> the exact changes done to the PHY drivers.

Yes. I have been trying to find other ways to handle such move, but I
couldn't find any.

-- 
With best wishes
Dmitry