[PATCH v3 0/6] arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree

[Jens Glathe via B4 Relay]

Device tree for the Lenovo Thinkbook 16 G7 QOY

The Laptop is a Snapdragon X1 / X1 Plus (Purwa) based device [1].

Supported features:

- USB type-c and type-a ports
- Keyboard
- Touchpad (all that are described in the dsdt)
- Touchscreen (described in the dsdt, no known SKUss)
- Display including PWM backlight control
- PCIe devices
- nvme
- SDHC card reader
- ath12k WCN7850 Wifi and Bluetooth
- ADSP and CDSP
- GPIO keys (Lid switch)
- Sound via internal speakers / DMIC / USB / headphone jack
- DP Altmode with 2 lanes (as all of these still do)
- Integrated fingerprint reader (FPC)
- Integrated UVC camera

Not supported yet:

- HDMI port.
- EC and some fn hotkeys.

Limited support yet:

- SDHC card reader is based on the on-chip sdhc_2 controller, but the driver from
the Snapdragon Dev Kit is only a partial match. It can do normal slow sd cards,
but not UHS-I (SD104) and UHS-II.

- The GPU is not yet supported. Graphics is only software rendered.

This work was done without any schematics or non-public knowledge of the device.
So, it is based on the existing x1 device trees, dsdt analysis, using HWInfo
ARM64, and pure guesswork. It has been confirmed, however, that the device really
has 4 NXP PTN3222 eUSB2 repeaters, one of which doesn't have a reset GPIO (eusb5
@43).

I have brought up the Thinkbook over the last 4 months since the x1p42100-crd
patches were available. The laptop is very usable now, and quite solid as a dev/
test platform. GPU support would be nice, though :)

Big thanks to Aleksandrs Vinarskis for helping (and sort of persisting) on the
fingerprint, camera and HDMI issues.

[1]: https://psref.lenovo.com/syspool/Sys/PDF/ThinkBook/ThinkBook_16_G7_QOY/ThinkBook_16_G7_QOY_Spec.pdf

Signed-off-by: Jens Glathe <jens.glathe at oldschoolsolutions.biz>
---
Changes in v3:
- removed changes in x1e80100.dtsi and x1p42100.dtsi - resolved with [2]
- fixed schema errors with correct compatible string for the model
- added power management for the camera via onboard_usb_dev.c
- amended node ordering
- changed the panel driver used to edp-panel, added panel in the driver
- amended x1e80100.dtsi for exposing PM8010: This one is not present in the design, 
  added /delete-node/ for it.
- removed commented-out lines for sdhc, specified which don't work.
- corrected ZAP shader firmware name
- Link to v2: https://lore.kernel.org/r/20250516-tb16-dt-v2-0-7c4996d58ed6@oldschoolsolutions.biz

Changes in v2:
- removed nodes that gave DTC compile errors (pm8010_thermal, edp0_hpd_active)
- amended qcom.yaml
- shortened the commit titles to fit 75 chars
- Link to v1: https://lore.kernel.org/r/20250515-tb16-dt-v1-0-dc5846a25c48@oldschoolsolutions.biz

[2]: 20250520-topic-x1p4_tsens-v2-1-9687b789a4fb at oss.qualcomm.com

---
Jens Glathe (6):
      dt-bindings: arm: qcom: Add Lenovo TB16 support
      drm/panel-edp: add N160JCE-ELL CMN panel for Lenovo Thinkbook 16
      usb: misc: onboard_usb_dev: Add Bison Electronics Inc. Integrated Camera
      firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
      arm64: dts: qcom: x1p42100: Add Lenovo ThinkBook 16 G7 QOY
      arm64: dts: qcom: Add Lenovo ThinkBook 16 device tree

 Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    3 +
 arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi       |    2 +-
 .../boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts | 1655 ++++++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c                   |    1 +
 drivers/gpu/drm/panel/panel-edp.c                  |    1 +
 drivers/usb/misc/onboard_usb_dev.c                 |    2 +
 drivers/usb/misc/onboard_usb_dev.h                 |    8 +
 8 files changed, 1672 insertions(+), 1 deletion(-)
---
base-commit: 176e917e010cb7dcc605f11d2bc33f304292482b
change-id: 20250511-tb16-dt-e84c433d87b1

Best regards,
-- 
Jens Glathe <jens.glathe at oldschoolsolutions.biz>