[PATCH] drm/bridge: adv7511: Do not merge adv7511_mode_set() with atomic_enable()

[Tommaso Merciai]

Hi Laurent,
Thanks for your comment.

On 26/05/25 12:49, Laurent Pinchart wrote:
> On Mon, May 26, 2025 at 11:58:37AM +0200, Tommaso Merciai wrote:
>> Hi Maxime,
>> Thanks for your comment.
>>
>> On 26/05/25 11:26, Maxime Ripard wrote:
>>> Hi,
>>>
>>> On Mon, May 26, 2025 at 10:54:52AM +0200, Tommaso Merciai wrote:
>>>> After adv7511_mode_set() was merged into .atomic_enable(), only the
>>>> native resolution is working when using modetest.
>>>>
>>>> This is caused by incorrect timings: adv7511_mode_set() must not be
>>>> merged into .atomic_enable().
>>>>
>>>> Move adv7511_mode_set() back to the .mode_set() callback in
>>>> drm_bridge_funcs to restore correct behavior.
>>>>
>>>> Fixes: 0a9e2f0a6466 ("drm/bridge: adv7511: switch to the HDMI connector helpers")
>>>> Reported-by: Biju Das <biju.das.jz at bp.renesas.com>
>>>> Closes: https://lore.kernel.org/all/aDB8bD6cF7qiSpKd@tom-desktop/
>>>> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
>>>
>>> Explaining why, both in the commit log and the comments, would be nice.
>>> Because I can't think of any good reason it just can't work for that
>>> bridge.
>>
>> Sorry, let me clarify and share with you some details:
>>
>> adv7511_mode_set:
>>    - Is setting up timings registers for the DSI2HDMI bridge in our case
>>      we are using ADV7535 bridge.
>>
>> rzg2l_mipi_dsi_atomic_enable:
>>    - Is setting up the vclock for the DSI ip
>>
>> Testing new/old implementation a bit we found the following:
>>
>> root at smarc-rzg3e:~# modetest -M rzg2l-du -d -s HDMI-A-1:800x600-56.25 at XR24
>> setting mode 800x600-56.25Hz on connectors HDMI-A-1, crtc 62
>> [   49.273134] adv7511_mode_set_old: drm_mode_vrefresh(mode) = 56
>> [   49.281006] rzg2l_mipi_dsi_atomic_enable: mode->clock: 36000
>>
>> root at smarc-rzg3e:~# modetest -M rzg2l-du -d -s HDMI-A-1:800x600-56.25 at XR24
>> setting mode 800x600-56.25Hz on connectors HDMI-A-1, crtc 62
>> [   74.076881] rzg2l_mipi_dsi_atomic_enable: mode->clock: 36000
>> [   74.092130] adv7511_mode_set: drm_mode_vrefresh(adj_mode) = 56
>>
>> Same result but different timing (in function call perspective):
>>
>>    - old: adv7511_mode_set() is call before rzg2l_mipi_dsi_atomic_enable()
>>    - new: adv7511_mode_set() is call after rzg2l_mipi_dsi_atomic_enable()
> 
> What is "old" and "new" here ? Is it before and after Dmitry's patch, or
> before and after yours ? Please be precise when describing problems.

Sorry, you are completely right:

  - old --> before Dmitry's patch
  - new --> after Dmitry's patch

> 
>> What do you think? Thanks in advance.
> 
> You're only explaining above what the "old" and "new" behaviours are,
> and claiming one of them is causing an issue, but you're not explaining
> *why* it causes an issue. That's what your commit message is expected to
> detail.
> 

Thanks for the clarification! :)
I will send v2 explaining better this.

Thanks & Regards,
Tommaso