[PATCH v3] video: screen_info: Relocate framebuffers behind PCI bridges
Thomas Zimmermann
tzimmermann at suse.de
Wed May 28 08:02:08 UTC 2025
Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.
Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.
The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.
Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.
v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Javier Martinez Canillas <javierm at redhat.com>
Reported-by: "Ivan T. Ivanov" <iivanov at suse.de>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1240696
Tested-by: "Ivan T. Ivanov" <iivanov at suse.de>
Fixes: 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers")
Cc: dri-devel at lists.freedesktop.org
Cc: <stable at vger.kernel.org> # v6.9+
---
drivers/video/screen_info_pci.c | 79 +++++++++++++++++++++------------
1 file changed, 50 insertions(+), 29 deletions(-)
diff --git a/drivers/video/screen_info_pci.c b/drivers/video/screen_info_pci.c
index 6c5833517141..66bfc1d0a6dc 100644
--- a/drivers/video/screen_info_pci.c
+++ b/drivers/video/screen_info_pci.c
@@ -7,8 +7,8 @@
static struct pci_dev *screen_info_lfb_pdev;
static size_t screen_info_lfb_bar;
-static resource_size_t screen_info_lfb_offset;
-static struct resource screen_info_lfb_res = DEFINE_RES_MEM(0, 0);
+static resource_size_t screen_info_lfb_res_start; // original start of resource
+static resource_size_t screen_info_lfb_offset; // framebuffer offset within resource
static bool __screen_info_relocation_is_valid(const struct screen_info *si, struct resource *pr)
{
@@ -31,7 +31,7 @@ void screen_info_apply_fixups(void)
if (screen_info_lfb_pdev) {
struct resource *pr = &screen_info_lfb_pdev->resource[screen_info_lfb_bar];
- if (pr->start != screen_info_lfb_res.start) {
+ if (pr->start != screen_info_lfb_res_start) {
if (__screen_info_relocation_is_valid(si, pr)) {
/*
* Only update base if we have an actual
@@ -47,46 +47,67 @@ void screen_info_apply_fixups(void)
}
}
+static int __screen_info_lfb_pci_bus_region(const struct screen_info *si, unsigned int type,
+ struct pci_bus_region *r)
+{
+ u64 base, size;
+
+ base = __screen_info_lfb_base(si);
+ if (!base)
+ return -EINVAL;
+
+ size = __screen_info_lfb_size(si, type);
+ if (!size)
+ return -EINVAL;
+
+ r->start = base;
+ r->end = base + size - 1;
+
+ return 0;
+}
+
static void screen_info_fixup_lfb(struct pci_dev *pdev)
{
unsigned int type;
- struct resource res[SCREEN_INFO_MAX_RESOURCES];
- size_t i, numres;
+ struct pci_bus_region bus_region;
int ret;
+ struct resource r = {
+ .flags = IORESOURCE_MEM,
+ };
+ const struct resource *pr;
const struct screen_info *si = &screen_info;
if (screen_info_lfb_pdev)
return; // already found
type = screen_info_video_type(si);
- if (type != VIDEO_TYPE_EFI)
- return; // only applies to EFI
+ if (!__screen_info_has_lfb(type))
+ return; // only applies to EFI; maybe VESA
- ret = screen_info_resources(si, res, ARRAY_SIZE(res));
+ ret = __screen_info_lfb_pci_bus_region(si, type, &bus_region);
if (ret < 0)
return;
- numres = ret;
- for (i = 0; i < numres; ++i) {
- struct resource *r = &res[i];
- const struct resource *pr;
-
- if (!(r->flags & IORESOURCE_MEM))
- continue;
- pr = pci_find_resource(pdev, r);
- if (!pr)
- continue;
-
- /*
- * We've found a PCI device with the framebuffer
- * resource. Store away the parameters to track
- * relocation of the framebuffer aperture.
- */
- screen_info_lfb_pdev = pdev;
- screen_info_lfb_bar = pr - pdev->resource;
- screen_info_lfb_offset = r->start - pr->start;
- memcpy(&screen_info_lfb_res, r, sizeof(screen_info_lfb_res));
- }
+ /*
+ * Translate the PCI bus address to resource. Account
+ * for an offset if the framebuffer is behind a PCI host
+ * bridge.
+ */
+ pcibios_bus_to_resource(pdev->bus, &r, &bus_region);
+
+ pr = pci_find_resource(pdev, &r);
+ if (!pr)
+ return;
+
+ /*
+ * We've found a PCI device with the framebuffer
+ * resource. Store away the parameters to track
+ * relocation of the framebuffer aperture.
+ */
+ screen_info_lfb_pdev = pdev;
+ screen_info_lfb_bar = pr - pdev->resource;
+ screen_info_lfb_offset = r.start - pr->start;
+ screen_info_lfb_res_start = bus_region.start;
}
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY, 16,
screen_info_fixup_lfb);
--
2.49.0
More information about the dri-devel
mailing list