[PATCH v6 0/4] Add support for DU/DSI clocks and DSI driver support for the Renesas RZ/V2H(P) SoC

Prabhakar prabhakar.csengg at gmail.com
Fri May 30 17:18:37 UTC 2025


From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

Hi All,

This patch series adds DU/DSI clocks and provides support for the
MIPI DSI interface on the RZ/V2H(P) SoC. It was originally part of
series [0], but has now been split into 4 patches due to dependencies
on the clock driver, making it easier to review and merge.

[0] https://lore.kernel.org/all/20250430204112.342123-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Note: This patch series applies on top of the following patch series:
[1] https://lore.kernel.org/all/20250530165906.411144-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

v5-> v6:
- Renamed CPG_PLL_STBY_SSCGEN_WEN to CPG_PLL_STBY_SSC_EN_WEN
- Updated CPG_PLL_CLK1_DIV_K, CPG_PLL_CLK1_DIV_M, and
  CPG_PLL_CLK1_DIV_P macros to use GENMASK
- Updated req->rate in rzv2h_cpg_plldsi_div_determine_rate()
- Dropped the cast in rzv2h_cpg_plldsi_div_set_rate()
- Dropped rzv2h_cpg_plldsi_round_rate() and implemented
  rzv2h_cpg_plldsi_determine_rate() instead
- Made use of FIELD_PREP()
- Moved CPG_CSDIV1 macro in patch 2/4
- Dropped two_pow_s in rzv2h_dsi_get_pll_parameters_values()
- Used mul_u32_u32() while calculating output_m and output_k_range
- Used div_s64() instead of div64_s64() while calculating
  pll_k
- Used mul_u32_u32() while calculating fvco and fvco checks
- Rounded the final output using DIV_U64_ROUND_CLOSEST()
- Renamed CLK_DIV_PLLETH_LPCLK to CLK_CDIV4_PLLETH_LPCLK
- Renamed CLK_CSDIV_PLLETH_LPCLK to CLK_PLLETH_LPCLK_GEAR
- Renamed CLK_PLLDSI_SDIV2 to CLK_PLLDSI_GEAR
- Renamed plldsi_sdiv2 to plldsi_gear
- Preserved the sort order (by part number).
- Added reviewed tag from Geert.
- Made use of GENMASK() macro for PLLCLKSET0R_PLL_*,
  PHYTCLKSETR_* and PHYTHSSETR_* macros.
- Replaced 10000000UL with 10 * MEGA
- Renamed mode_freq_hz to mode_freq_khz in rzv2h_dsi_mode_calc
- Replaced `i -= 1;` with `i--;`
- Renamed RZV2H_MIPI_DPHY_FOUT_MIN_IN_MEGA to
  RZV2H_MIPI_DPHY_FOUT_MIN_IN_MHZ and
  RZV2H_MIPI_DPHY_FOUT_MAX_IN_MEGA to
  RZV2H_MIPI_DPHY_FOUT_MAX_IN_MHZ.
  
Cheers,
Prabhakar

Lad Prabhakar (4):
  clk: renesas: rzv2h-cpg: Add support for DSI clocks
  clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
  dt-bindings: display: bridge: renesas,dsi: Add support for RZ/V2H(P)
    SoC
  drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC

 .../bindings/display/bridge/renesas,dsi.yaml  | 116 ++++--
 drivers/clk/renesas/r9a09g057-cpg.c           |  63 ++++
 drivers/clk/renesas/rzv2h-cpg.c               | 278 +++++++++++++-
 drivers/clk/renesas/rzv2h-cpg.h               |  17 +
 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 345 ++++++++++++++++++
 .../drm/renesas/rz-du/rzg2l_mipi_dsi_regs.h   |  34 ++
 include/linux/clk/renesas-rzv2h-dsi.h         | 210 +++++++++++
 7 files changed, 1025 insertions(+), 38 deletions(-)
 create mode 100644 include/linux/clk/renesas-rzv2h-dsi.h

-- 
2.49.0



More information about the dri-devel mailing list