<div dir="ltr">Hi Jean-François, Dne petek, 25. november 2016 11.22.20 UTC+1 je oseba Jean-François Moine napisala:<blockquote class="gmail_quote" style="margin: 0;margin-left: 0.8ex;border-left: 1px #ccc solid;padding-left: 1ex;">On Fri, 25 Nov 2016 17:41:51 +0800 Icenowy Zheng <<a href="javascript:" target="_blank" gdf-obfuscated-mailto="nM5JXKD5CAAJ" rel="nofollow" onmousedown="this.href='javascript:';return true;" onclick="this.href='javascript:';return true;">ice...@aosc.xyz</a>> wrote: > After removing CLK_PLL_DE's assigned-clock, the kernel passes compilation. The 'pll-de' and 'de' must have a fixed rate. Otherwise, if you do not use the legacy u-boot, I don't know which can be the rate of the DE. > However, it cannot recognize any HDMI screen... > > (My board is Orange Pi One, and I manually added status="okay"; to &lcd0, &de, &hdmi) > > [ 16.507802] sun8i-de2 1000000.de-controller: bound 1c0c000.lcd-controller (ops de2_lcd_ops [sun8i_de2_drm]) > [ 16.675948] sun8i-de2 1000000.de-controller: bound 1ee0000.hdmi (ops de2_hdmi_fini [sun8i_de2_hdmi]) > [ 16.685120] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 16.695876] [drm] No driver support for vblank timestamp query. > [ 16.701862] sun8i-de2 1000000.de-controller: No connectors reported connected with modes > [ 16.713061] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 16.734214] Console: switching to colour frame buffer device 128x48 > [ 16.751022] sun8i-de2 1000000.de-controller: fb0: frame buffer device I put a 'pr_warn' message is case the EDID cannot be read. Have you this message? Anyway, there is a problem with the EDID: - my Orange Pi 2 (H3) randomly fails to read it. But this succeeds after rebooting once or twice. </blockquote><div> My U-Boot driver never exhibited a problem with reading EDID on OPi2. However, I'm reusing code from Rockchip HDMI U-Boot driver for this (with some Allwinner adjustments). </div><blockquote class="gmail_quote" style="margin: 0;margin-left: 0.8ex;border-left: 1px #ccc solid;padding-left: 1ex;">- my Banana Pi M2+ (H3) reads it correctly each time. - my Banana Pi M3 (A83T) can never read it. BTW, on first tries, I was forcing a CEA mode thru the kernel command line. This was working with the OPi2 and BPiM3, but there was no sound. In the last version, I use a EDID in edid_firmware for having sound with the BPiM3. This works fine. But, forcing a CEA mode is no more possible, so, when the OPi2 cannot read the EDID, the system switches to a VGA mode (default 1024x768) which is not supported. It seems that this is your case. So, in brief, if your board cannot read the EDID, put a EDID somewhere and its path in /sys/module/drm_kms_helper/parameters/edid_firmware. There will be no console, but X11 will work correctly. -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | <a href="http://moinejf.free.fr/" target="_blank" rel="nofollow" onmousedown="this.href='http://www.google.com/url?q\x3dhttp%3A%2F%2Fmoinejf.free.fr%2F\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNESRA_te-ZTLUIi7EVaDrS5Q9YJ7w';return true;" onclick="this.href='http://www.google.com/url?q\x3dhttp%3A%2F%2Fmoinejf.free.fr%2F\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNESRA_te-ZTLUIi7EVaDrS5Q9YJ7w';return true;">http://moinejf.free.fr/</a></blockquote><div> Best regards, Jernej Škrabec </div></div>