<div dir="ltr">On Wed, Mar 29, 2017 at 8:02 AM, Ville Syrjälä <<a href="mailto:ville.syrjala@linux.intel.com">ville.syrjala@linux.intel.com</a>> wrote:<br>><br>> On Mon, Mar 27, 2017 at 05:57:57PM -0400, Alastair Bridgewater wrote:<br>> > And the tenth patch enables stereo mode support...  on HDMI and DPort<br>> > connectors on nv50+ hardware.  HDMI connectors because obvious.  DPort<br>> > connectors because of DPort to HDMI adaptors.<br>><br>> Do you mean DP++ or actual protocol converters? DP++ is just HDMI with<br>> a some electrical tweaks, but IIRC proper DP defines 3D stereo quite<br>> differently than HDMI. I'm not sure if we should be able to push HDMI<br>> style 3D through DP->HDMI/DP++ adaptors. The specs are unfortunately<br>> very vague when it comes to such devices.<br><br>DP++. Good point about the protocol converters, though I don't recall<br>seeing any way to distinguish between a DP and a DP++ connector in<br>nouveau, nor do I know if nVidia actually made any boards with DP that<br>isn't DP++. I guess I have some digging to do in that direction. Thank<br>you.<br><br>> > eDP connectors because<br>> > it shouldn't do any harm, and someone might have been maniac enough to<br>> > set up an eDP port to point to something with an HDMI 3D setup.  And<br>> > nv50+ hardware only because while I'm not aware of any pre-nv50 cards<br>> > that have HDMI outputs, there could be a setup out there like the PS3<br>> > that uses an external HDMI encoder on pre-nv50 hardware, at which<br>> > point none of the mode timing or InfoFrame support is in place for it.<br><br>-- Alastair Bridgewater</div>