<div dir="ltr">FYI: please note that pSemi's legal department has informed me that they do *not* want to keep the "ArcticSand" copyright notices and the single pSemi line is appropriate. </div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Jul 8, 2019 at 2:02 PM Dan Murphy <<a href="mailto:dmurphy@ti.com" target="_blank">dmurphy@ti.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Brian<br>
<br>
On 6/30/19 7:28 PM, Brian Dodge wrote:<br>
> The vendor-prefixes.txt file properly refers to ArcticSand<br>
> as arctic but the driver bindings improperly abbreviated the<br>
> prefix to arc. This was a mistake in the original patch. This<br>
> patch adds "arctic" and retains "arc" (deprecated) bindings<br>
><br>
> Signed-off-by: Brian Dodge <<a href="mailto:bdodge09@gmail.com" target="_blank">bdodge09@gmail.com</a>><br>
> ---<br>
> .../bindings/leds/backlight/arcxcnn_bl.txt | 31 +++++++++++++++-------<br>
> 1 file changed, 21 insertions(+), 10 deletions(-)<br>
><br>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt<br>
> index 230abde..4d98394 100644<br>
> --- a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt<br>
> +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt<br>
> @@ -1,8 +1,13 @@<br>
> -Binding for ArcticSand arc2c0608 LED driver<br>
> +Binding for ArcticSand arc family LED drivers<br>
> <br>
> Required properties:<br>
> -- compatible: should be "arc,arc2c0608"<br>
> -- reg: slave address<br>
> +- compatible: one of<br>
> + "arctic,arc1c0608"<br>
> + "arctic,arc2c0608"<br>
> + "arctic,arc3c0845"<br>
> + "arc,arc2c0608" (deprecated)<br>
> +<br>
> +- reg: slave address<br>
> <br>
> Optional properties:<br>
> - default-brightness: brightness value on boot, value from: 0-4095<br>
> @@ -11,19 +16,25 @@ Optional properties:<br>
> - led-sources: List of enabled channels from 0 to 5.<br>
> See Documentation/devicetree/bindings/leds/common.txt<br>
> <br>
> -- arc,led-config-0: setting for register ILED_CONFIG_0<br>
> -- arc,led-config-1: setting for register ILED_CONFIG_1<br>
> -- arc,dim-freq: PWM mode frequence setting (bits [3:0] used)<br>
> -- arc,comp-config: setting for register CONFIG_COMP<br>
> -- arc,filter-config: setting for register FILTER_CONFIG<br>
> -- arc,trim-config: setting for register IMAXTUNE<br>
> +- arctic,led-config-0: setting for register ILED_CONFIG_0<br>
> +- arctic,led-config-1: setting for register ILED_CONFIG_1<br>
> +- arctic,dim-freq: PWM mode frequence setting (bits [3:0] used)<br>
> +- arctic,comp-config: setting for register CONFIG_COMP<br>
> +- arctic,filter-config: setting for register FILTER_CONFIG<br>
> +- arctic,trim-config: setting for register IMAXTUNE<br>
> +- arc,led-config-0: setting for register ILED_CONFIG_0 (deprecated)<br>
> +- arc,led-config-1: setting for register ILED_CONFIG_1 (deprecated)<br>
> +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) (deprecated)<br>
> +- arc,comp-config: setting for register CONFIG_COMP (deprecated)<br>
> +- arc,filter-config: setting for register FILTER_CONFIG (deprecated)<br>
> +- arc,trim-config: setting for register IMAXTUNE (deprecated)<br>
> <br>
> Note: Optional properties not specified will default to values in IC EPROM<br>
> <br>
> Example:<br>
> <br>
> arc2c0608@30 {<br>
> - compatible = "arc,arc2c0608";<br>
> + compatible = "arctic,arc2c0608";<br>
> reg = <0x30>;<br>
> default-brightness = <500>;<br>
> label = "lcd-backlight";<br>
<br>
<br>
Reviewed-by: Dan Murphy <<a href="mailto:dmurphy@ti.com" target="_blank">dmurphy@ti.com</a>><br>
<br>
</blockquote></div>