<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW - amdgpu reported fan speed looks too high (dual fan Sapphire Pulse Vega 56 and Sapphire RX 5700 XT)" href="https://bugs.freedesktop.org/show_bug.cgi?id=105718#c6">Comment # 6</a> on <a class="bz_bug_link bz_status_NEW " title="NEW - amdgpu reported fan speed looks too high (dual fan Sapphire Pulse Vega 56 and Sapphire RX 5700 XT)" href="https://bugs.freedesktop.org/show_bug.cgi?id=105718">bug 105718</a> from <a class="email" href="mailto:shtetldik@gmail.com" title="Shmerl <shtetldik@gmail.com>"> Shmerl</a> <pre>Hm, it could be radeon-profile mis-reporting fan load percentage, using the max value of 3200 reported by sensors. That's where I got those 50% I mentioned above. I just run The Witcher without vsync (Wine+dxvk) which loads GPU almost to 100% consistently. Here is what I see: >From sensors: amdgpu-pci-0f00 Adapter: PCI adapter vddgfx: +1.12 V fan1: 1892 RPM (min = 0 RPM, max = 3200 RPM) edge: +76.0°C (crit = +118.0°C, hyst = +0.0°C) (emerg = +80000.0°C) junction: +94.0°C (crit = +80000.0°C, hyst = +0.0°C) (emerg = +80000.0°C) mem: +88.0°C (crit = +80000.0°C, hyst = +0.0°C) (emerg = +80000.0°C) power1: 182.00 W (cap = 195.00 W) From: /sys/kernel/debug/dri/0/amdgpu_pm_info GPU Temperature: 76 C GPU Load: 99 % MEM Load: 50 % So the fan shows around 1900 rpm for full load and 76°C. That is closer to 1570 rpm described in the Gamersnexus review. So may be it's correct? It would be good to get some input from AMD, from those who know something about VBIOS and Navi firmware.</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the assignee for the bug.</li> </ul> </body> </html>