<pre>
Dear Matthias,

Thanks for the review.


On Tue, 2022-11-08 at 18:46 +0100, Matthias Brugger wrote:
>
> On 07/11/2022 08:22, Nancy.Lin wrote:
> > Add four mmsys config APIs. The config APIs are used for config
> > mmsys reg. Some mmsys regs need to be set according to the
> > HW engine binding to the mmsys simultaneously.
> >
> > 1. mtk_mmsys_merge_async_config: config merge async width/height.
> > async is used for cross-clock domain synchronization.
> > 2. mtk_mmsys_hdr_confing: config hdr backend async width/height.
> > 3. mtk_mmsys_mixer_in_config and mtk_mmsys_mixer_in_config:
> > config mixer related settings.
> >
> > Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > Reviewed-by: CK Hu <ck.hu@mediatek.com>
> > Tested-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
>
> Not something we need to fix in this series, but it would make sense
> instead of
> adding all the EXPORTS to pass the functions as callbacks in the
> platform_device_register_data. But I realize you don't pass the
> VDOSYS number to
> the DRM driver to distinguish between the different MMSYS devices
> that created
> the platform device. I hadn't had a deep look on the DRM
> implementation but I
> suppose it will be challenge...
>
> Regards,
> Matthias
>

Do you mean to move all the mmsys config APIs as callback in mmsys
driver data?
If so, not only the four mmsys config APIs in this patch but also the
following original three APIs.
It would take some refactoring effort. I think it would be better to
change this after this series for vdosys1 if needed.

1. mtk_mmsys_ddp_connect
2. mtk_mmsys_ddp_disconnect
3. mtk_mmsys_ddp_dpi_fmt_config

Regards,
Nancy

> > ---
> > drivers/soc/mediatek/mt8195-mmsys.h | 6 +++++
> > drivers/soc/mediatek/mtk-mmsys.c | 35
> > ++++++++++++++++++++++++++
> > include/linux/soc/mediatek/mtk-mmsys.h | 9 +++++++
> > 3 files changed, 50 insertions(+)
> >
> > diff --git a/drivers/soc/mediatek/mt8195-mmsys.h
> > b/drivers/soc/mediatek/mt8195-mmsys.h
> > index fd7b455bd675..454944a9409c 100644
> > --- a/drivers/soc/mediatek/mt8195-mmsys.h
> > +++ b/drivers/soc/mediatek/mt8195-mmsys.h
> > @@ -75,6 +75,12 @@
> > #define MT8195_SOUT_DSC_WRAP1_OUT_TO_SINA_VIRTUAL0
> > (2 << 16)
> > #define MT8195_SOUT_DSC_WRAP1_OUT_TO_VPP_MERGE
> > (3 << 16)
> >
> > +#define MT8195_VDO1_MERGE0_ASYNC_CFG_WD
> > 0xe30
> > +#define MT8195_VDO1_HDRBE_ASYNC_CFG_WD
> > 0xe70
> > +#define MT8195_VDO1_HDR_TOP_CFG
> > 0xd00
> > +#define MT8195_VDO1_MIXER_IN1_ALPHA
> > 0xd30
> > +#define MT8195_VDO1_MIXER_IN1_PAD0xd40
> > +
> > #define MT8195_VDO1_VPP_MERGE0_P0_SEL_IN0xf04
> > #define MT8195_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0
> > 1
> >
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > b/drivers/soc/mediatek/mtk-mmsys.c
> > index 73c8bd27e6ae..6040a3cff6f8 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -137,6 +137,41 @@ void mtk_mmsys_ddp_disconnect(struct device
> > *dev,
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
> >
> > +void mtk_mmsys_merge_async_config(struct device *dev, int idx, int
> > width, int height)
> > +{
> > +mtk_mmsys_update_bits(dev_get_drvdata(dev),
> > MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
> > + ~0, height << 16 | width);
> > +}
> > +EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
> > +
> > +void mtk_mmsys_hdr_config(struct device *dev, int be_width, int
> > be_height)
> > +{
> > +mtk_mmsys_update_bits(dev_get_drvdata(dev),
> > MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
> > + be_height << 16 | be_width);
> > +}
> > +EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_config);
> > +
> > +void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool
> > alpha_sel, u16 alpha,
> > + u8 mode, u32 biwidth)
> > +{
> > +struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
> > +
> > +mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx
> > - 1) * 4, ~0,
> > + alpha << 16 | alpha);
> > +mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 +
> > idx),
> > + alpha_sel << (19 + idx));
> > +mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx -
> > 1) * 4,
> > + GENMASK(31, 16) | GENMASK(1, 0), biwidth
> > << 16 | mode);
> > +}
> > +EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
> > +
> > +void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx,
> > bool channel_swap)
> > +{
> > +mtk_mmsys_update_bits(dev_get_drvdata(dev),
> > MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
> > + BIT(4), channel_swap << 4);
> > +}
> > +EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
> > +
> > void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val)
> > {
> > if (val)
> > diff --git a/include/linux/soc/mediatek/mtk-mmsys.h
> > b/include/linux/soc/mediatek/mtk-mmsys.h
> > index 127f1b888ace..a4708859c188 100644
> > --- a/include/linux/soc/mediatek/mtk-mmsys.h
> > +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> > @@ -75,4 +75,13 @@ void mtk_mmsys_ddp_disconnect(struct device
> > *dev,
> >
> > void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val);
> >
> > +void mtk_mmsys_merge_async_config(struct device *dev, int idx, int
> > width, int height);
> > +
> > +void mtk_mmsys_hdr_config(struct device *dev, int be_width, int
> > be_height);
> > +
> > +void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool
> > alpha_sel, u16 alpha,
> > + u8 mode, u32 biwidth);
> > +
> > +void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx,
> > bool channel_swap);
> > +
> > #endif /* __MTK_MMSYS_H */

</pre><!--type:text--><!--{--><pre>************* MEDIATEK Confidentiality Notice ********************
The information contained in this e-mail message (including any 
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be 
conveyed only to the designated recipient(s). Any use, dissemination, 
distribution, printing, retaining or copying of this e-mail (including its 
attachments) by unintended recipient(s) is strictly prohibited and may 
be unlawful. If you are not an intended recipient of this e-mail, or believe 
that you have received this e-mail in error, please notify the sender 
immediately (by replying to this e-mail), delete any and all copies of 
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!
</pre><!--}-->