<pre>
On Mon, 2023-01-09 at 12:25 +0100, AngeloGioacchino Del Regno wrote:
> Il 06/01/23 04:05, xinlei.lee@mediatek.com ha scritto:
> > From: Xinlei Lee <xinlei.lee@mediatek.com>
> >
> > Since the panel spec stipulates that the time from lcm_reset to DSI
> > to
> > send the initial code should be greater than 6ms and less than
> > 40ms,
> > so reduce the delay before sending the initial code and avoid panel
> > exceptions.
> >
> > Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga
> > dsi video mode panel")
> > Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
> > ---
> > drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > index 857a2f0420d7..f0093035f1ff 100644
> > --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > @@ -780,7 +780,6 @@ static const struct panel_init_cmd
> > inx_hj110iz_init_cmd[] = {
> > };
> >
> > static const struct panel_init_cmd boe_init_cmd[] = {
> > -_INIT_DELAY_CMD(24),
>
> You said that should be greater than 6 and less than 40: perhaps on
> MediaTek
> platforms removing this delay is fine but we don't know about others
> - and this
> driver is for all platforms.
>
> To stay on the safe side you should, at this point, replace this
> delay with
>
> _INIT_DELAY_CMD(7);
>
> Regards,
> Angelo
>

Hi Angelo:

Thanks for your reply!

Please allow me to explain, in another dsi modification of this
series, I reduced the delay of dsi's LP00->LP11 stage from 20ms to 1ms
(to comply with dsi spec), in fact, in this file, the
boe_panel_prepare function The 6ms delay after pulling up lcm_reset
is before the 1ms mentioned just now, which ensures that the delay is
within the specified range (7ms).

Do you still have doubts about my explanation?

Best Regards!
xinlei

</pre><!--type:text--><!--{--><pre>************* MEDIATEK Confidentiality Notice ********************
The information contained in this e-mail message (including any 
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be 
conveyed only to the designated recipient(s). Any use, dissemination, 
distribution, printing, retaining or copying of this e-mail (including its 
attachments) by unintended recipient(s) is strictly prohibited and may 
be unlawful. If you are not an intended recipient of this e-mail, or believe 
that you have received this e-mail in error, please notify the sender 
immediately (by replying to this e-mail), delete any and all copies of 
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!
</pre><!--}-->