<html><body><p> <pre> Hi CK, Thanks for the review. On Tue, 2023-12-26 at 05:14 +0000, CK Hu (胡俊光) wrote: > Hi, Jason: > > On Sun, 2023-12-24 at 02:29 +0800, Jason-JH.Lin wrote: > > Add secure layer config support for ovl. > > > > TODO: > > 1. Move DISP_REG_OVL_SECURE setting to secure world. > > 2. Change the parameter register address in mtk_ddp_sec_write() > > from "u32 addr" to "struct cmdq_client_reg *cmdq_reg". > > > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_disp_drv.h | 2 ++ > > drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 31 > > +++++++++++++++++++-- > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 29 > > +++++++++++++++++++ > > 3 files changed, 60 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h > > b/drivers/gpu/drm/mediatek/mtk_disp_drv.h > > index 1311562d25cc..77054adcd9cf 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h > > @@ -9,6 +9,7 @@ > > #include <linux/soc/mediatek/mtk-cmdq.h> > > #include <linux/soc/mediatek/mtk-mmsys.h> > > #include <linux/soc/mediatek/mtk-mutex.h> > > +#include "mtk_drm_ddp_comp.h" > > #include "mtk_drm_plane.h" > > #include "mtk_mdp_rdma.h" > > > > @@ -82,6 +83,7 @@ void mtk_ovl_clk_disable(struct device *dev); > > void mtk_ovl_config(struct device *dev, unsigned int w, > > unsigned int h, unsigned int vrefresh, > > unsigned int bpc, struct cmdq_pkt *cmdq_pkt); > > +u64 mtk_ovl_get_sec_port(struct mtk_ddp_comp *comp, unsigned int > > idx); > > int mtk_ovl_layer_check(struct device *dev, unsigned int idx, > > struct mtk_plane_state *mtk_state); > > void mtk_ovl_layer_config(struct device *dev, unsigned int idx, > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > index 2bffe4245466..c18f76412a2e 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > @@ -46,6 +46,7 @@ > > #define DISP_REG_OVL_ADDR(ovl, n)((ovl)->data->addr + > > 0x20 * (n)) > > #define DISP_REG_OVL_HDR_ADDR(ovl, n)((ovl)->data- > > > addr + 0x20 * (n) + 0x04) > > > > #define DISP_REG_OVL_HDR_PITCH(ovl, n)((ovl)->data- > > > addr + 0x20 * (n) + 0x08) > > > > +#define DISP_REG_OVL_SECURE0x0fc0 > > > > #define GMC_THRESHOLD_BITS16 > > #define GMC_THRESHOLD_HIGH((1 << GMC_THRESHOLD_BITS) / 4) > > @@ -126,8 +127,19 @@ struct mtk_disp_ovl { > > const struct mtk_disp_ovl_data*data; > > void(*vblank_cb)(void *data); > > void*vblank_cb_data; > > +resource_size_tregs_pa; > > }; > > > > +u64 mtk_ovl_get_sec_port(struct mtk_ddp_comp *comp, unsigned int > > idx) > > +{ > > +if (comp->id == DDP_COMPONENT_OVL0) > > +return BIT_ULL(CMDQ_SEC_DISP_OVL0); > > +else if (comp->id == DDP_COMPONENT_OVL1) > > +return BIT_ULL(CMDQ_SEC_DISP_OVL1); > > + > > +return 0; > > +} > > + > > static irqreturn_t mtk_disp_ovl_irq_handler(int irq, void *dev_id) > > { > > struct mtk_disp_ovl *priv = dev_id; > > @@ -449,8 +461,22 @@ void mtk_ovl_layer_config(struct device *dev, > > unsigned int idx, > > DISP_REG_OVL_SRC_SIZE(idx)); > > mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl- > > > regs, > > > > DISP_REG_OVL_OFFSET(idx)); > > -mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl- > > > regs, > > > > - DISP_REG_OVL_ADDR(ovl, idx)); > > + > > +if (state->pending.is_secure) { > > +const struct drm_format_info *fmt_info = > > drm_format_info(fmt); > > +unsigned int buf_size = (pending->height - 1) * > > pending->pitch + > > +pending->width * fmt_info- > > > cpp[0]; > > > > + > > +mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &ovl->cmdq_reg, > > ovl->regs, > > + DISP_REG_OVL_SECURE, BIT(idx)); > > +mtk_ddp_sec_write(cmdq_pkt, ovl->regs_pa + > > DISP_REG_OVL_ADDR(ovl, idx), > > + pending->addr, CMDQ_IWC_H_2_MVA, 0, > > buf_size, 0); > > Mapping iova should be done when buffer allocation or some other > mapping function, instead of every OVL frame configuration. So the > size > should not be set here. > > Regards, > CK > Since we can only get the secure handle when the plane updates, the buffer have to be mapped here every time. So I'll ask IOMMU owner to move this mapping process into allocation step, then we can remove the size here. Regards, Jason-JH.Lin </pre> </p></body></html><pre>************* MEDIATEK Confidentiality Notice ******************** The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you! </pre>