<html><body><p>
<pre>
Hi, Angelo:
On Thu, 2024-05-16 at 10:11 +0200, AngeloGioacchino Del Regno wrote:
> Document OF graph on MMSYS/VDOSYS: this supports up to three DDP paths
> per HW instance (so potentially up to six displays for multi-vdo SoCs).
>
> The MMSYS or VDOSYS is always the first component in the DDP pipeline,
> so it only supports an output port with multiple endpoints - where each
> endpoint defines the starting point for one of the (currently three)
> possible hardware paths.
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> .../bindings/arm/mediatek/mediatek,mmsys.yaml | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> index b3c6888c1457..0ef67ca4122b 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> @@ -93,6 +93,34 @@ properties:
> '#reset-cells':
> const: 1
>
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Output port node. This port connects the MMSYS/VDOSYS output to
> + the first component of one display pipeline, for example one of
> + the available OVL or RDMA blocks.
> + Some MediaTek SoCs support multiple display outputs per MMSYS.
The display pipeline number usually depend on how many display interface. Display interface is in the end of pipeline.
In below case, two RDMA is merged into one pipeline and output to one display interface DP_INTF. This is usually ONE display.
RDMA -+
Merge -> ... -> DP_INTF
RDMA -+
In below case, one RDMA data output to two display interface DSI and DPI. This is usually TWO display with the same content.
+-> DSI
RDMA -> ... -> +
+-> DPI
So the display pipeline number does not depend on the number of first component. It usually depend on the number of display interface.
Regards,
CK
> + properties:
> + endpoint@0:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Output to the primary display pipeline
> +
> + endpoint@1:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Output to the secondary display pipeline
> +
> + endpoint@2:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Output to the tertiary display pipeline
> +
> + oneOf:
> + - required:
> + - endpoint@0
> + - required:
> + - endpoint@1
> + - required:
> + - endpoint@2
> +
> required:
> - compatible
> - reg
</pre>
</p></body></html><!--type:text--><!--{--><pre>************* MEDIATEK Confidentiality Notice ********************
The information contained in this e-mail message (including any
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be
conveyed only to the designated recipient(s). Any use, dissemination,
distribution, printing, retaining or copying of this e-mail (including its
attachments) by unintended recipient(s) is strictly prohibited and may
be unlawful. If you are not an intended recipient of this e-mail, or believe
that you have received this e-mail in error, please notify the sender
immediately (by replying to this e-mail), delete any and all copies of
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!
</pre><!--}-->