<div dir="ltr"><div>Hello,</div><div><br></div><div>Unfortunately, I've found that the recent Anbernic RG35XX Plus uses a new panel labeled `YLM-LBV0345001H-V2`, which is not compatible with the `WL-355608-A8` in its initialization sequence.</div>Thus, the name `rg35xx-plus-panel` is no longer a unique identifier for the panel.<br><br>I think it should be renamed to `anbernic,wl-355608-a8` to distinguish them, and `anbernic,ylm-lbv0345001h-v2` should be added for the new panel.<br><br>Best regards,<br>kikuchan.<br><br>On Sun, Oct 20, 2024 at 8:34 PM Dmitry Baryshkov <<a href="mailto:dmitry.baryshkov@linaro.org">dmitry.baryshkov@linaro.org</a>> wrote:<br>><br>> On Sun, 20 Oct 2024 21:37:41 +1300, Ryan Walklin wrote:<br>> > The Anbernic RG35XX devices use an SPI LCD panel from an unknown OEM,<br>> > with an NV3052C driver chip.<br>> ><br>> > As discussed previously, the integrating vendor and device name are<br>> > preferred instead of the OEM serial. A previous patch corrected the<br>> > device tree binding and of_device_id in the NV3052C driver, however the<br>> > spi_device_id also needs correction.<br>> ><br>> > [...]<br>><br>> Applied to drm-misc-next, thanks!<br>><br>> [1/1] drm: panel: nv3052c: correct spi_device_id for RG35XX panel<br>>       commit: 45608a3eb4902f32010a8328c0a01ccda4b38c9b<br>><br>> Best regards,<br>> --<br>> With best wishes<br>> Dmitry<br>><br></div>