<!DOCTYPE html><html><head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body> Am 12.11.24 um 17:33 schrieb Thomas Hellström: <blockquote type="cite" cite="mid:d469ab3509a1b875ad0c44d01569675682d6c61c.camel@linux.intel.com">[SNIP] <blockquote type="cite"> <blockquote type="cite"> <blockquote type="cite"> <pre class="moz-quote-pre" wrap="">This has been extensively discussed already, but was expected to really only be needed for low-on-memory scenarios. However it now seems like the need is much earlier due to the random userptr page joining by core mm. </pre> </blockquote> <pre class="moz-quote-pre" wrap="">Just to clarify here: In Long-Running mode with recoverable pagefaults enabled we don't have any preempt-fences, but rather just zap the PTEs pointing to the affected memory and flush TLB. So from a memory resource POW a breakpoint should be safe, and no mmu notifier nor shrinker will be blocked. </pre> </blockquote> <pre class="moz-quote-pre" wrap=""> That sounds like a HMM based approach which would clearly work. But where is that? I don't see any HMM based approach anywhere in the XE driver. </pre> </blockquote> <pre class="moz-quote-pre" wrap=""> This is a mode that uses recoverable pagefaults to fault either full userptr or full bos, and used with DRM_XE_VM_CRATE_FLAG_FAULT_MODE. (not SVM)! userptrs in xe are bo-less, and using the vm's resv, but otherwise using hmm similar to amdgpu: xe_hmm.c</pre> </blockquote> Yeah, I have seen that one. <blockquote type="cite" cite="mid:d469ab3509a1b875ad0c44d01569675682d6c61c.camel@linux.intel.com"> <pre class="moz-quote-pre" wrap="">fault servicing: xe_gt_pagefault.c PTE zapping on eviction and notifier: xe_vm_invalidate_vma(), xe_vm.c</pre> </blockquote> Ah, that was the stuff I was missing. So the implementation in xe_preempt_fence.c is just for graphics submissions? That would make the whole thing much easier to handle. The only remaining question I can then see is if long running submissions with DRM_XE_VM_CRATE_FLAG_FAULT_MODE could potentially block graphics submissions without this flag from accessing the hardware? Thanks a lot for pointing this out, Christian. <blockquote type="cite" cite="mid:d469ab3509a1b875ad0c44d01569675682d6c61c.camel@linux.intel.com"> <pre class="moz-quote-pre" wrap=""> Thanks, Thomas </pre> <blockquote type="cite"> <pre class="moz-quote-pre" wrap=""> Regards, Christian. </pre> <blockquote type="cite"> <pre class="moz-quote-pre" wrap=""> Nor will there be any jobs with published dma-fences depending on the job blocked either temporarily by a pagefault or long-term by a debugger breakpoint. /Thomas </pre> <blockquote type="cite"> <pre class="moz-quote-pre" wrap="">If that is done and the memory pre-empt fence is serviced even for debuggable contexts, do you have further concerns with the presented approach from dma-buf and drm/sched perspective? Regards, Joonas </pre> <blockquote type="cite"> <pre class="moz-quote-pre" wrap="">Regards, Christian. This means that a breakpoint or core dump doesn't halt GPU threads, but rather suspends them. E.g. all running wave data is collected into a state bag which can be restored later on. I was under the impression that those long running compute threads do exactly that, but when the hardware can't switch out the GPU thread/process while in a break then that isn't the case. As long as you don't find a way to avoid that this patch set is a pretty clear NAK from my side as DMA-buf and TTM maintainer. I believe this is addressed above. Matt What might work is to keep the submission on the hardware in the break state but forbid any memory access. This way you can signal your preemption fence even when the hardware isn't made available. Before you continue XE setups a new pre-emption fence and makes sure that all page tables etc... are up to date. Could be tricky to get this right if completion fence based submissions are mixed in as well, but that gives you at least a direction you could potentially go. Regards, Christian. Regards, Joonas Regards, Christian. Some wash-up thoughts from me below, but consider them fairly irrelevant since I think the main driver for these big questions here should be gdb/userspace. Quoting Christian König (2024-11-07 11:44:33) Am 06.11.24 um 18:00 schrieb Matthew Brost: [SNIP] This is not a generic interface that anyone can freely access. The same permissions used by ptrace are checked when opening such an interface. See [1] [2]. [1] <a class="moz-txt-link-freetext" href="https://patchwork.freedesktop.org/patch/617470/?series=136572&r">https://patchwork.freedesktop.org/patch/617470/?series=136572&r</a> e v=2 [2] <a class="moz-txt-link-freetext" href="https://patchwork.freedesktop.org/patch/617471/?series=136572&r">https://patchwork.freedesktop.org/patch/617471/?series=136572&r</a> e v=2 Thanks a lot for those pointers, that is exactly what I was looking for. And yeah, it is what I feared. You are re-implementing existing functionality, but see below. Could you elaborate on what this "existing functionality" exactly is? I do not think this functionality exists at this time. The EU debugging architecture for Xe specifically avoids the need for GDB to attach with ptrace to the CPU process or interfere with the CPU process for the debugging via parasitic threads or so. Debugger connection is opened to the DRM driver for given PID (which uses the ptrace may access check for now) after which the all DRM client of that PID are exposed to the debugger process. What we want to expose via that debugger connection is the ability for GDB to read/write the different GPU VM address spaces (ppGTT for Intel GPUs) just like the EU threads would see them. Note that the layout of the ppGTT is completely up to the userspace driver to setup and is mostly only partially equal to the CPU address space. Specifically as part of reading/writing the ppGTT for debugging purposes, there are deep flushes needed: for example flushing instruction cache when adding/removing breakpoints. Maybe that will explain the background. I elaborate on this at the end some more. kmap/vmap are used everywhere in the DRM subsystem to access BOs, so I’m failing to see the problem with adding a simple helper based on existing code. What#s possible and often done is to do kmap/vmap if you need to implement a CPU copy for scanout for example or for copying/validating command buffers. But that usually requires accessing the whole BO and has separate security checks. When you want to access only a few bytes of a BO that sounds massively like a peek/poke like interface and we have already rejected that more than once. There even used to be standardized GEM IOCTLs for that which have been removed by now. Referring to the explanation at top: These IOCTL are not for the debugging target process to issue. The peek/poke interface is specifically for GDB only to facilitate the emulation of memory reads/writes on the GPU address space as they were done by EUs themselves. And to recap: for modifying instructions for example (add/remove breakpoint), extra level of cache flushing is needed which is not available to regular userspace. I specifically discussed with Sima on the difference before moving forward with this design originally. If something has changed since then, I'm of course happy to rediscuss. However, if this code can't be added, not sure how we would ever be able to implement core dumps for GPU threads/memory? If you need to access BOs which are placed in not CPU accessible memory then implement the access callback for ptrace, see amdgpu_ttm_access_memory for an example how to do this. As also mentioned above, we don't work via ptrace at all when it comes to debugging the EUs. The only thing used for now is the ptrace_may_access to implement similar access restrictions as ptrace has. This can be changed to something else if needed. Ptrace access via vm_operations_struct.access → ttm_bo_vm_access. This series renames ttm_bo_vm_access to ttm_bo_access, with no code changes. The above function accesses a BO via kmap if it is in SYSTEM / TT, which is existing code. This function is only exposed to user space via ptrace permissions. Maybe this sentence is what caused the confusion. Userspace is never exposed with peek/poke interface, only the debugger connection which is its own FD. In this series, we implement a function [3] similar to amdgpu_ttm_access_memory for the TTM vfunc access_memory. What is missing is non-visible CPU memory access, similar to amdgpu_ttm_access_memory_sdma. This will be addressed in a follow-up and was omitted in this series given its complexity. So, this looks more or less identical to AMD's ptrace implementation, but in GPU address space. Again, I fail to see what the problem is here. What am I missing? The main question is why can't you use the existing interfaces directly? We're not working on the CPU address space or BOs. We're working strictly on the GPU address space as would be seen by an EU thread if it accessed address X. Additional to the peek/poke interface of ptrace Linux has the pidfd_getfd system call, see herehttps://man7.org/linux/man-pages/man2/pidfd_getfd.2.html. The pidfd_getfd() allows to dup() the render node file descriptor into your gdb process. That in turn gives you all the access you need from gdb, including mapping BOs and command submission on behalf of the application. We're not operating on the CPU address space nor are we operating on BOs (there is no concept of BO in the EU debug interface). Each VMA in the VM could come from anywhere, only the start address and size matter. And neither do we need to interfere with the command submission of the process under debug. As far as I can see that allows for the same functionality as the eudebug interface, just without any driver specific code messing with ptrace permissions and peek/poke interfaces. So the question is still why do you need the whole eudebug interface in the first place? I might be missing something, but that seems to be superfluous from a high level view. Recapping from above. It is to allow the debugging of EU threads per DRM client, completely independent of the CPU process. If ptrace_may_acces is the sore point, we could consider other permission checks, too. There is no other connection to ptrace in this architecture as single permission check to know if PID is fair game to access by debugger process. Why no parasitic thread or ptrace: Going forward, binding the EU debugging to the DRM client would also pave way for being able to extend core kernel generated core dump with each DRM client's EU thread/memory dump. We have similar feature called "Offline core dump" enabled in the downstream public trees for i915, where we currently attach the EU thread dump to i915 error state and then later combine i915 error state with CPU core dump file with a tool. This is relatively little amount of extra code, as this baseline series already introduces GDB the ability to perform the necessary actions. It's just the matter of kernel driver calling: "stop all threads", then copying the memory map and memory contents for GPU threads, just like is done for CPU threads. With parasitic thread injection, not sure if there is such way forward, as it would seem to require to inject quite abit more logic to core kernel? It's true that the AMD KFD part has still similar functionality, but that is because of the broken KFD design of tying driver state to the CPU process (which makes it inaccessible for gdb even with imported render node fd). Both Sima and I (and partially Dave as well) have pushed back on the KFD approach. And the long term plan is to get rid of such device driver specific interface which re-implement existing functionality just differently. Recapping, this series is not adding it back. The debugger connection is a separate FD from the DRM one, with separate IOCTL set. We don't allow the DRM FD any new operations based on ptrace is attached or not. We don't ever do that check even. We only restrict the opening of the debugger connection to given PID with ptrace_may_access check for now. That can be changed to something else, if necessary. Yeah I think unnecessarily tying gpu processes to cpu processes is a bad thing, least because even today all the svm discussions we have still hit clear use-cases, where a 1:1 match is not wanted (like multiple gpu svm sections with offsets). Not even speaking of all the gpu usecases where the gpu vm space is still entirely independent of the cpu side. So that's why I think this entirely separate approach looks like the right one, with ptrace_may_access as the access control check to make sure we match ptrace on the cpu side. But there's very obviously a bikeshed to be had on what the actual uapi should look like, especially how gdb opens up a gpu debug access fd. But I also think that's not much on drm to decide, but whatever gdb wants. And then we aim for some consistency on that lookup/access control part (ideally, I might be missing some reasons why this is a bad idea) across drm drivers. So you need to have a really really good explanation why the eudebug interface is actually necessary. TL;DR The main point is to decouple the debugging of the EU workloads from the debugging of the CPU process. This avoids the interference with the CPU process with parasitic thread injection. Further this also allows generating a core dump without any GDB connected. There are also many other smaller pros/cons which can be discussed but for the context of this patch, this is the main one. So unlike parasitic thread injection, we don't unlock any special IOCTL for the process under debug to be performed by the parasitic thread, but we allow the minimal set of operations to be performed by GDB as if those were done on the EUs themselves. One can think of it like the minimal subset of ptrace but for EU threads, not the CPU threads. And thus, building on this it's possible to extend the core kernel generated core dumps with DRM specific extension which would contain the EU thread/memory dump. It might be good to document (in that debugging doc patch probably) why thread injection is not a great option, and why the tradeoffs for debugging are different than for for checkpoint/restore, where with CRIU we landed on doing most of this in userspace, and often requiring injection threads to make it all work. Cheers, Sima Regards, Joonas Regards, Christian. Matt [3] <a class="moz-txt-link-freetext" href="https://patchwork.freedesktop.org/patch/622520/?series=140200&r">https://patchwork.freedesktop.org/patch/622520/?series=140200&r</a> e v=6 Regards, Christian. Matt Regards, Christian. </pre> </blockquote> </blockquote> </blockquote> <pre class="moz-quote-pre" wrap=""> </pre> </blockquote> <pre class="moz-quote-pre" wrap=""> </pre> </blockquote> </body> </html>