<html><body><p>
<pre>
Hi, Shuijing:

On Sun, 2024-10-27 at 14:32 +0100, Jens Ziller wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
>
>
> Am Fri, 12 Apr 2024 11:11:39 +0800
> schrieb Shuijing Li <shuijing.li@mediatek.com>:
>
> > This patch correct calculation formula of PHY timing.
> > The spec define HS-PREPARE should be from 40ns+4*UI(44ns) to
> > 85ns+6*UI(91ns). But current duration is 88ns and is near the
> > boundary. So this patch make the duration to 64ns so it is near the
> > safe range.
>
> Hi Shuijing,
>
> with this patch the panel in the Tentacruel ASUS Chromebook CM14
> (CM1402F) flickers. There are 1 or 2 times per second a black panel.
> Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when I reverse
> this patch. There's a bug inside. Can you please check that?

Please help Jens to fix this bug.
Otherwise, I've to revert this patch.

Regards,
CK

>
> Best regards
> Jens
>
> >
> > Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
> > ---
> > Changes in v2:
> > Add a commit to describe the improvements to this patch in detail,
> > per suggestion frome previous thread:
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20240315072945.19502-1-shuijing.li@mediatek.com/__;!!CTRNKA9wMg0ARbw!nA3Auuq2W3qyf3a8OtzDvLICN_xfq5zUozp_-Wo7Q4jR9l6qKlxiWNC4TZPXQa8W08veWhokHyRrvCodcpg$
> > ---
> > drivers/gpu/drm/mediatek/mtk_dsi.c | 33
> > +++++++++++++++--------------- 1 file changed, 17 insertions(+), 16
> > deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > b/drivers/gpu/drm/mediatek/mtk_dsi.c index a2fdfc8ddb15..d1bd7d671880
> > 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > @@ -235,22 +235,23 @@ static void mtk_dsi_phy_timconfig(struct
> > mtk_dsi *dsi) u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate,
> > 1000000); struct mtk_phy_timing *timing = &dsi->phy_timing;
> >
> > - timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
> > - timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) /
> > 8000;
> > - timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) /
> > 8000 + 1 -
> > - timing->da_hs_prepare;
> > - timing->da_hs_trail = timing->da_hs_prepare + 1;
> > -
> > - timing->ta_go = 4 * timing->lpx - 2;
> > - timing->ta_sure = timing->lpx + 2;
> > - timing->ta_get = 4 * timing->lpx;
> > - timing->da_hs_exit = 2 * timing->lpx + 1;
> > -
> > - timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
> > - timing->clk_hs_post = timing->clk_hs_prepare + 8;
> > - timing->clk_hs_trail = timing->clk_hs_prepare;
> > - timing->clk_hs_zero = timing->clk_hs_trail * 4;
> > - timing->clk_hs_exit = 2 * timing->clk_hs_trail;
> > + timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
> > + timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) /
> > 8000 + 1;
> > + timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) /
> > 8000 + 1 -
> > + timing->da_hs_prepare;
> > + timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000
> > + 1; +
> > + timing->ta_go = 4 * timing->lpx;
> > + timing->ta_sure = 3 * timing->lpx / 2;
> > + timing->ta_get = 5 * timing->lpx;
> > + timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
> > +
> > + timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) +
> > 1;
> > + timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) /
> > 8000 + 1;
> > + timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) /
> > 8000 + 1;
> > + timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1
> > -
> > + timing->clk_hs_prepare;
> > + timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
> >
> > timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
> > timing->da_hs_zero << 16 | timing->da_hs_trail <<
> > 24;
>
>

</pre>
</p></body></html><!--type:text--><!--{--><pre>************* MEDIATEK Confidentiality Notice ********************
The information contained in this e-mail message (including any 
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be 
conveyed only to the designated recipient(s). Any use, dissemination, 
distribution, printing, retaining or copying of this e-mail (including its 
attachments) by unintended recipient(s) is strictly prohibited and may 
be unlawful. If you are not an intended recipient of this e-mail, or believe 
that you have received this e-mail in error, please notify the sender 
immediately (by replying to this e-mail), delete any and all copies of 
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!
</pre><!--}-->