<html><body><p> <pre> Hi Angelo, On Thu, 2024-11-21 at 09:55 +0100, AngeloGioacchino Del Regno wrote: > External email : Please do not click links or open attachments until > you have verified the sender or the content. > > > Il 21/11/24 05:25, Jason-JH.Lin ha scritto: > > This patch series adds support for the MediaTek MT8196 SoC in the > > CMDQ > > driver and related subsystems. The changes include adding > > compatible > > names and properties, updating driver data to accommodate hardware > > changes, and modifying the CMDQ API to support non-subsys ID > > hardware. > > > > Jason-JH.Lin (8): > > dt-bindings: mailbox: mediatek: Add GCE header file for MT8196 > > dt-bindings: mailbox: mediatek: Add MT8196 support for gce- > > mailbox > > mailbox: mtk-cmdq: Add driver data to support for MT8196 > > soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing > > flow > > soc: mediatek: mtk-cmdq: Add mminfra_offset compatibility for > > DRAM > > address > > soc: mediatek: Add pa_base due to CMDQ API change > > drm/mediatek: Add pa_base due to CMDQ API change > > media: mediatek: mdp3: Add pa_base due to CMDQ API change > > > > .../mailbox/mediatek,gce-mailbox.yaml | 4 + > > drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 6 +- > > drivers/mailbox/mtk-cmdq-mailbox.c | 107 +- > > .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c | 4 +- > > .../platform/mediatek/mdp3/mtk-mdp3-comp.h | 4 +- > > drivers/soc/mediatek/mtk-cmdq-helper.c | 133 +- > > drivers/soc/mediatek/mtk-mmsys.c | 1 + > > drivers/soc/mediatek/mtk-mutex.c | 2 +- > > .../dt-bindings/mailbox/mediatek,mt8196-gce.h | 1449 > > +++++++++++++++++ > > include/linux/mailbox/mtk-cmdq-mailbox.h | 3 + > > include/linux/soc/mediatek/mtk-cmdq.h | 22 +- > > 11 files changed, 1698 insertions(+), 37 deletions(-) > > create mode 100755 include/dt-bindings/mailbox/mediatek,mt8196- > > gce.h > > > > > Hello Jason, > I had a fast look at the changes that you're proposing with this > series. > > The reasons behind this are more or less understood on my side, but > the > actual changes look a bit odd in the sense that passing a physical > address > like this, on a first glance, not only looks like it may be > dangerous, but > also looks like there's a lot of room for improvement. > It's because hardware subsys ID for GCE is no longer to be used in MT8196. So we need to put the PA into the instruction then GCE can know where to write the configuration. > Can you please point me at some driver/code (or a reference downsream > kernel > for this SoC, which would be even better) so that I can take a look > at how > is that being used? Before MT8196, the most general use case is in the mtk_ddp_write(), mtk_ddp_write_mask() at mtk_ddp_comp.c. The client drivers will pass the `struct cmdq_client_reg` which has stored the subsys ID, offset ans size parsing from the DTS node. The client drivers use the subsys ID via CMDQ API to generate the instructions. And GCE knows where the subsys ID is mapping to the corresponding hardware register pa_base, so it can configure the hardware register correctly. That's the main change in this series and feel free to ask me more details. Or if you have anything want to know rapidly. You can find me in the Google Chat :-) Regards, Jason-JH.Lin > > Thanks, > Angelo </pre> </p></body></html><pre>************* MEDIATEK Confidentiality Notice ******************** The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you! </pre>