<html><body><p> <pre> Hi, Angelo: On Wed, 2024-11-20 at 13:44 +0100, AngeloGioacchino Del Regno wrote: > External email : Please do not click links or open attachments until you have verified the sender or the content. > > > Add support for the DPI block found in the MT8195 and MT8188 SoCs. > Inside of the SoC, this block is directly connected to the HDMI IP. In MT8173, DPI0 is directly connected to HDMI. The first version of this driver is just for MT8173 DPI0. Does MT8173 DPI0 need this modification? Or this modification is just for MT8188 and MT8195, then the description should be more than 'directly connected'. Regards, CK > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- </pre> </p></body></html><pre>************* MEDIATEK Confidentiality Notice ******************** The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you! </pre>