<html><body><p>
<pre>
On Thu, 2025-05-15 at 17:34 +0800, paul-pl.chen wrote:
> From: Paul-pl Chen <paul-pl.chen@mediatek.com>
>
> BLENDER executes the alpha blending function for overlapping
> layers from different sources, which is the primary function
> of the overlapping system.
>
> Signed-off-by: Nancy Lin <nancy.lin@mediatek.com>
> Signed-off-by: Paul-pl Chen <paul-pl.chen@mediatek.com>
> ---
[snip]
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_blender.c
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2025 MediaTek Inc.
> + */
> +
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_blend.h>
> +#include <drm/drm_framebuffer.h>
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
> +
> +#include "mtk_crtc.h"
> +#include "mtk_ddp_comp.h"
> +#include "mtk_disp_drv.h"
> +#include "mtk_drm_drv.h"
alphabetic order.
> +#include "mtk_disp_blender.h"
> +#include "mtk_disp_ovl.h"
> +
>
[snip]
> +
> +void mtk_disp_blender_config(struct device *dev, unsigned int w,
> + unsigned int h, unsigned int vrefresh,
> + unsigned int bpc, bool most_top,
vrefresh and bpc is useless, so drop them.
> + bool most_bottom, struct cmdq_pkt *cmdq_pkt)
> +{
> +struct mtk_disp_blender *priv = dev_get_drvdata(dev);
> +u32 datapath;
> +
> +dev_dbg(dev, "%s-w:%d, h:%d\n", __func__, w, h);
> +mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_ROI_SIZE);
> +mtk_ddp_write(cmdq_pkt, DISP_REG_OVL_BLD_BGCLR_BALCK, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_BGCLR_CLR);
> +
> +/*
> + * The input source of blender layer can be EXDMA layer output or
> + * the blender constant layer itself.
> + * This color setting is configured for the blender constant layer.
> + */
> +mtk_ddp_write(cmdq_pkt, DISP_REG_OVL_BLD_BGCLR_BALCK, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_L0_CLR);
> +
> +if (most_top)
> +datapath = OVL_BLD_BGCLR_OUT_TO_PROC;
> +else
> +datapath = OVL_BLD_BGCLR_OUT_TO_NEXT_LAYER;
> +/*
> + * The primary input is from EXDMA and the second input
> + * is optionally from another blender
> + */
> +if (!most_bottom)
> +datapath |= OVL_BLD_BGCLR_IN_SEL;
> +
> +mtk_ddp_write_mask(cmdq_pkt, datapath,
> + &priv->cmdq_reg, priv->regs, DISP_REG_OVL_BLD_DATAPATH_CON,
> + OVL_BLD_BGCLR_OUT_TO_PROC | OVL_BLD_BGCLR_OUT_TO_NEXT_LAYER |
> + OVL_BLD_BGCLR_IN_SEL);
> +}
> +
> +void mtk_disp_blender_start(struct device *dev, struct cmdq_pkt *cmdq_pkt)
Drop cmdq_pkt.
> +{
> +struct mtk_disp_blender *priv = dev_get_drvdata(dev);
> +
> +mtk_ddp_write_mask(cmdq_pkt, OVL_BLD_BYPASS_SHADOW, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_SHADOW_CTRL, OVL_BLD_BYPASS_SHADOW);
> +mtk_ddp_write_mask(cmdq_pkt, OVL_BLD_EN, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_EN, OVL_BLD_EN);
> +}
> +
> +void mtk_disp_blender_stop(struct device *dev, struct cmdq_pkt *cmdq_pkt)
Drop cmdq_pkt.
Regards,
CK
> +{
> +struct mtk_disp_blender *priv = dev_get_drvdata(dev);
> +
> +mtk_ddp_write_mask(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_EN, OVL_BLD_EN);
> +
> +mtk_ddp_write_mask(cmdq_pkt, OVL_BLD_RST, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_RST, OVL_BLD_RST);
> +mtk_ddp_write_mask(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
> + DISP_REG_OVL_BLD_RST, OVL_BLD_RST);
> +}
> +
</pre>
</p></body></html><!--type:text--><!--{--><pre>************* MEDIATEK Confidentiality Notice
********************
The information contained in this e-mail message (including any
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be
conveyed only to the designated recipient(s). Any use, dissemination,
distribution, printing, retaining or copying of this e-mail (including its
attachments) by unintended recipient(s) is strictly prohibited and may
be unlawful. If you are not an intended recipient of this e-mail, or believe
that you have received this e-mail in error, please notify the sender
immediately (by replying to this e-mail), delete any and all copies of
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!
</pre><!--}-->