[PATCH 3/3] etnaviv: SINGLE_BUFFER support on GC3000
Christian Gmeiner
christian.gmeiner at gmail.com
Thu Apr 13 14:25:21 UTC 2017
Hi
2017-04-13 16:05 GMT+02:00 Wladimir J. van der Laan <laanwj at gmail.com>:
> This patch adds support for the SINGLE_BUFFER feature on GC3000
> GPUs, which allows rendering to a single buffer using multiple pixel
> pipes.
>
> This feature is always used when it is available, which means that
> multi-tiled formats are no longer being used in that case, and all
> buffers will be normal (super)tiled. This mimics the behavior of the
> blob on GC3000.
>
> - Because the same format can be used to render to and texture from,
> this avoids an extra resolve pass when rendering to texture.
>
> - i.MX6qp includes a PRE which can scan-out directly from tiled formats,
> avoiding untiling overhead.
Just some small nitpicks else
Series is:
Reviewed-by: Christian Gmeiner <christian.gmeiner at gmail.com>
Btw.. we could land this for 17.0.1 if this lands before 00:00 GMT tomorrow.
> ---
> src/gallium/drivers/etnaviv/etnaviv_context.c | 3 +++
> src/gallium/drivers/etnaviv/etnaviv_emit.c | 6 ++++--
> src/gallium/drivers/etnaviv/etnaviv_internal.h | 3 +++
> src/gallium/drivers/etnaviv/etnaviv_resource.c | 9 +++++++-
> src/gallium/drivers/etnaviv/etnaviv_rs.c | 29 ++++++++++++++++++--------
> src/gallium/drivers/etnaviv/etnaviv_screen.c | 5 +++++
> src/gallium/drivers/etnaviv/etnaviv_state.c | 10 +++++++--
> src/gallium/drivers/etnaviv/etnaviv_surface.c | 21 +++++++++++++------
> 8 files changed, 66 insertions(+), 20 deletions(-)
>
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_context.c b/src/gallium/drivers/etnaviv/etnaviv_context.c
> index 555aa12..f2f709c 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_context.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_context.c
> @@ -293,6 +293,9 @@ etna_cmd_stream_reset_notify(struct etna_cmd_stream *stream, void *priv)
> etna_set_state(stream, VIVS_RA_EARLY_DEPTH, 0x00000031);
> etna_set_state(stream, VIVS_PA_W_CLIP_LIMIT, 0x34000001);
>
> + /* Enable SINGLE_BUFFER for resolve, if supported */
> + etna_set_state(stream, VIVS_RS_SINGLE_BUFFER, COND(ctx->specs.single_buffer, VIVS_RS_SINGLE_BUFFER_ENABLE));
> +
> ctx->dirty = ~0L;
>
> /* go through all the used resources and clear their status flag */
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_emit.c b/src/gallium/drivers/etnaviv/etnaviv_emit.c
> index af74cbb..7ced5fc 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_emit.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_emit.c
> @@ -603,10 +603,12 @@ etna_emit_state(struct etna_context *ctx)
> if (unlikely(dirty & (ETNA_DIRTY_STENCIL_REF))) {
> /*014A0*/ EMIT_STATE(PE_STENCIL_CONFIG_EXT, ctx->stencil_ref.PE_STENCIL_CONFIG_EXT);
> }
> + if (unlikely(dirty & (ETNA_DIRTY_BLEND | ETNA_DIRTY_FRAMEBUFFER))) {
> + struct etna_blend_state *blend = etna_blend_state(ctx->blend);
> + /*014A4*/ EMIT_STATE(PE_LOGIC_OP, blend->PE_LOGIC_OP | ctx->framebuffer.PE_LOGIC_OP);
> + }
> if (unlikely(dirty & (ETNA_DIRTY_BLEND))) {
> struct etna_blend_state *blend = etna_blend_state(ctx->blend);
> -
> - /*014A4*/ EMIT_STATE(PE_LOGIC_OP, blend->PE_LOGIC_OP);
> for (int x = 0; x < 2; ++x) {
> /*014A8*/ EMIT_STATE(PE_DITHER(x), blend->PE_DITHER[x]);
> }
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_internal.h b/src/gallium/drivers/etnaviv/etnaviv_internal.h
> index 2f09d55..2f8dacb 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_internal.h
> +++ b/src/gallium/drivers/etnaviv/etnaviv_internal.h
> @@ -72,6 +72,8 @@ struct etna_specs {
> unsigned has_shader_range_registers : 1;
> /* has the new sin/cos functions */
> unsigned has_new_sin_cos : 1;
> + /* supports single-buffer rendering with multiple pixel pipes */
> + unsigned single_buffer : 1;
> /* can use any kind of wrapping mode on npot textures */
> unsigned npot_tex_any_wrap;
> /* number of bits per TS tile */
> @@ -191,6 +193,7 @@ struct compiled_framebuffer_state {
> uint32_t TS_COLOR_CLEAR_VALUE;
> struct etna_reloc TS_COLOR_STATUS_BASE;
> struct etna_reloc TS_COLOR_SURFACE_BASE;
> + uint32_t PE_LOGIC_OP;
> bool msaa_mode; /* adds input (and possible temp) to PS */
> };
>
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_resource.c b/src/gallium/drivers/etnaviv/etnaviv_resource.c
> index 1f0582c..b4e853f 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_resource.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_resource.c
> @@ -248,9 +248,16 @@ etna_resource_create(struct pipe_screen *pscreen,
> if (util_format_is_compressed(templat->format))
> layout = ETNA_LAYOUT_LINEAR;
> } else if (templat->target != PIPE_BUFFER) {
> - bool want_multitiled = screen->specs.pixel_pipes > 1;
> + bool want_multitiled = false;
> bool want_supertiled = screen->specs.can_supertile && !DBG_ENABLED(ETNA_DBG_NO_SUPERTILE);
>
> + /* When this GPU supports single-buffer rendering, don't ever enable
> + * multi-tiling. This replicates the blob behavior on GC3000.
> + */
> + if (!screen->specs.single_buffer) {
> + want_multitiled = screen->specs.pixel_pipes > 1;
> + }
> +
Kick not needed { }
> /* Keep single byte blocksized resources as tiled, since we
> * are unable to use the RS blit to de-tile them. However,
> * if they're used as a render target or depth/stencil, they
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_rs.c b/src/gallium/drivers/etnaviv/etnaviv_rs.c
> index 295ca10..e133ac6 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_rs.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_rs.c
> @@ -70,19 +70,27 @@ etna_compile_rs_state(struct etna_context *ctx, struct compiled_rs_state *cs,
> COND(rs->source_tiling & 2, VIVS_RS_SOURCE_STRIDE_TILING) |
> COND(source_multi, VIVS_RS_SOURCE_STRIDE_MULTI);
>
> - cs->source[0].bo = rs->source;
> - cs->source[0].offset = rs->source_offset;
> - cs->source[0].flags = ETNA_RELOC_READ;
> + /* Initially all pipes to the source and destination buffer
> + * This will be overridden below as necessary for the multi-pipe,
> + * multi-tiled case.
> + */
> + for (unsigned pipe = 0; pipe < ctx->specs.pixel_pipes; ++pipe) {
> + cs->source[pipe].bo = rs->source;
> + cs->source[pipe].offset = rs->source_offset;
> + cs->source[pipe].flags = ETNA_RELOC_READ;
> +
> + cs->dest[pipe].bo = rs->dest;
> + cs->dest[pipe].offset = rs->dest_offset;
> + cs->dest[pipe].flags = ETNA_RELOC_WRITE;
>
> - cs->dest[0].bo = rs->dest;
> - cs->dest[0].offset = rs->dest_offset;
> - cs->dest[0].flags = ETNA_RELOC_WRITE;
> + cs->RS_PIPE_OFFSET[pipe] = VIVS_RS_PIPE_OFFSET_X(0) | VIVS_RS_PIPE_OFFSET_Y(0);
> + }
>
> cs->RS_DEST_STRIDE = (rs->dest_stride << dest_stride_shift) |
> COND(rs->dest_tiling & 2, VIVS_RS_DEST_STRIDE_TILING) |
> COND(dest_multi, VIVS_RS_DEST_STRIDE_MULTI);
>
> - if (ctx->specs.pixel_pipes == 1) {
> + if (ctx->specs.pixel_pipes == 1 || ctx->specs.single_buffer) {
> cs->RS_WINDOW_SIZE = VIVS_RS_WINDOW_SIZE_WIDTH(rs->width) |
> VIVS_RS_WINDOW_SIZE_HEIGHT(rs->height);
> } else if (ctx->specs.pixel_pipes == 2) {
> @@ -102,12 +110,11 @@ etna_compile_rs_state(struct etna_context *ctx, struct compiled_rs_state *cs,
>
> cs->RS_WINDOW_SIZE = VIVS_RS_WINDOW_SIZE_WIDTH(rs->width) |
> VIVS_RS_WINDOW_SIZE_HEIGHT(rs->height / 2);
> + cs->RS_PIPE_OFFSET[1] = VIVS_RS_PIPE_OFFSET_X(0) | VIVS_RS_PIPE_OFFSET_Y(rs->height / 2);
> } else {
> abort();
> }
>
> - cs->RS_PIPE_OFFSET[0] = VIVS_RS_PIPE_OFFSET_X(0) | VIVS_RS_PIPE_OFFSET_Y(0);
> - cs->RS_PIPE_OFFSET[1] = VIVS_RS_PIPE_OFFSET_X(0) | VIVS_RS_PIPE_OFFSET_Y(rs->height / 2);
> cs->RS_DITHER[0] = rs->dither[0];
> cs->RS_DITHER[1] = rs->dither[1];
> cs->RS_CLEAR_CONTROL = VIVS_RS_CLEAR_CONTROL_BITS(rs->clear_bits) | rs->clear_mode;
> @@ -117,6 +124,10 @@ etna_compile_rs_state(struct etna_context *ctx, struct compiled_rs_state *cs,
> cs->RS_FILL_VALUE[3] = rs->clear_value[3];
> cs->RS_EXTRA_CONFIG = VIVS_RS_EXTRA_CONFIG_AA(rs->aa) |
> VIVS_RS_EXTRA_CONFIG_ENDIAN(rs->endian_mode);
> + /* TODO: cs->RS_UNK016B0 = s->size / 64 ?
> + * The blob does this consistently but there seems to be no currently supported
> + * model that needs it.
> + */
> }
>
> void
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_screen.c b/src/gallium/drivers/etnaviv/etnaviv_screen.c
> index 41bacbc..9f3104f 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_screen.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_screen.c
> @@ -675,6 +675,11 @@ etna_get_specs(struct etna_screen *screen)
> screen->specs.max_rendertarget_size =
> VIV_FEATURE(screen, chipMinorFeatures0, RENDERTARGET_8K) ? 8192 : 2048;
>
> + screen->specs.single_buffer = VIV_FEATURE(screen, chipMinorFeatures4, SINGLE_BUFFER);
> + if (screen->specs.single_buffer) {
> + DBG("etnaviv: Single buffer mode enabled with %i pixel pipes\n", screen->specs.pixel_pipes);
> + }
> +
Kick not needed { }
> return true;
>
> fail:
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_state.c b/src/gallium/drivers/etnaviv/etnaviv_state.c
> index dbb6c54..d96b445 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_state.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_state.c
> @@ -168,8 +168,8 @@ etna_set_framebuffer_state(struct pipe_context *pctx,
> cs->PE_COLOR_ADDR = cbuf->reloc[0];
> cs->PE_COLOR_ADDR.flags = ETNA_RELOC_READ | ETNA_RELOC_WRITE;
> } else {
> - /* Rendered textures must always be multi-tiled */
> - assert(res->layout & ETNA_LAYOUT_BIT_MULTI);
> + /* Rendered textures must always be multi-tiled, or single-buffer mode must be supported */
> + assert((res->layout & ETNA_LAYOUT_BIT_MULTI) || ctx->specs.single_buffer);
> for (int i = 0; i < ctx->specs.pixel_pipes; i++) {
> cs->PE_PIPE_COLOR_ADDR[i] = cbuf->reloc[i];
> cs->PE_PIPE_COLOR_ADDR[i].flags = ETNA_RELOC_READ | ETNA_RELOC_WRITE;
> @@ -331,6 +331,12 @@ etna_set_framebuffer_state(struct pipe_context *pctx,
>
> cs->TS_MEM_CONFIG = ts_mem_config;
>
> + /* Single buffer setup. There is only one switch for this, not a separate
> + * one per color buffer / depth buffer. To keep the logic simple always use
> + * single buffer when this feature is available.
> + */
> + cs->PE_LOGIC_OP = VIVS_PE_LOGIC_OP_SINGLE_BUFFER(ctx->specs.single_buffer ? 2 : 0);
> +
> ctx->framebuffer_s = *sv; /* keep copy of original structure */
> ctx->dirty |= ETNA_DIRTY_FRAMEBUFFER;
> }
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_surface.c b/src/gallium/drivers/etnaviv/etnaviv_surface.c
> index a0013a4..d19f493 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_surface.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_surface.c
> @@ -94,12 +94,21 @@ etna_create_surface(struct pipe_context *pctx, struct pipe_resource *prsc,
> struct etna_resource_level *lev = &rsc->levels[level];
>
> /* Setup template relocations for this surface */
> - surf->reloc[0].bo = rsc->bo;
> - surf->reloc[0].offset = surf->surf.offset;
> - surf->reloc[0].flags = 0;
> - surf->reloc[1].bo = rsc->bo;
> - surf->reloc[1].offset = surf->surf.offset + lev->stride * lev->padded_height / 2;
> - surf->reloc[1].flags = 0;
> + for (unsigned pipe = 0; pipe < ctx->specs.pixel_pipes; ++pipe) {
> + surf->reloc[pipe].bo = rsc->bo;
> + surf->reloc[pipe].offset = surf->surf.offset;
> + surf->reloc[pipe].flags = 0;
> + }
> +
> + /* In single buffer mode, both pixel pipes must point to the same address,
> + * for multi-tiled surfaces on the other hand the second pipe is expected to
> + * point halfway the image vertically.
> + */
> + if (rsc->layout & ETNA_LAYOUT_BIT_MULTI) {
> + surf->reloc[1].bo = rsc->bo;
> + surf->reloc[1].offset = surf->surf.offset + lev->stride * lev->padded_height / 2;
> + surf->reloc[1].flags = 0;
> + }
>
> if (surf->surf.ts_size) {
> unsigned int layer_offset = layer * surf->surf.ts_layer_stride;
> --
> 2.7.4
>
More information about the etnaviv
mailing list