multiple Display initializing
Lucas Stach
l.stach at pengutronix.de
Wed Aug 9 10:40:50 UTC 2017
Hi Kai,
this is the wrong list. You are using the proprietary Vivante driver,
the etnaviv list only discusses the open-source drivers.
Please use the NXP support forums if you need help with the NXP supplied
Viavnte drivers.
Regards,
Lucas
Am Mittwoch, den 09.08.2017, 10:00 +0000 schrieb Kai Klein:
> Hi,
>
>
>
>
>
> we use a LVDS TFT 1024x600 with a i.mx6 Board and Angström Linux, we
> like to show a bootlogo until the xserver startsup, but the Driver or
> the xserver try multiple times to initialize the display with the same
> values.
>
>
>
> my question is how can we disable the initializing becourse its
> allready done for the Bootlogo.
>
>
>
> hope someone can help me.
>
>
>
> thank you
>
>
>
>
>
> [ 836.928897] mxc_sdc_fb fb at 0: 1280x800 h_sync,r,l: 1,64,5
> v_sync,l,u: 1,40,2 pixclock=68301000 Hz
>
> [ 837.071570] mxc_sdc_fb fb at 0: 1280x800 h_sync,r,l: 1,64,5
> v_sync,l,u: 1,40,2 pixclock=68301000 Hz
>
> [ 837.399152] mxc_sdc_fb fb at 0: 1280x800 h_sync,r,l: 1,64,5
> v_sync,l,u: 1,40,2 pixclock=68301000 Hz
>
> [ 837.513310] mxc_sdc_fb fb at 0: 1280x800 h_sync,r,l: 1,64,5
> v_sync,l,u: 1,40,2 pixclock=68301000 Hz
>
> [ 839.701188] mxc_sdc_fb fb at 0: 1280x800 h_sync,r,l: 1,64,5
> v_sync,l,u: 1,40,2 pixclock=68301000 Hz
>
>
>
>
>
> X Server 1.18.4 Release Date: 2016-07-19
>
>
>
> Linux 4.10.8-200.fc25.x86_64 x86_64
>
>
>
>
>
> Video Driver: 20.0
>
> [3243164.172] X.Org XInput driver : 22.1
>
> [3243164.191] X.Org Server Extension : 9.0
>
> [3243164.213] (II) xfree86: Adding drm device (/dev/dri/card0)
>
> [3243164.236] (II) no primary bus or device found
>
> [3243164.258] falling back to /sys/devices/platform/Vivante
> GCCore/drm/card0
>
> [3243164.292] (II) LoadModule: "glx"
>
> [3243164.322] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>
> [3243164.364] (EE) Failed to
> load /usr/lib/xorg/modules/extensions/libglx.so: /usr/lib/libGL.so.1.2: version `VERSION' not found (required by /usr/lib/xorg/modules/extensions/libglx.so)
>
> [3243164.378] (II) UnloadModule: "glx"
>
> [3243164.419] (II) Unloading glx
>
> [3243164.465] (EE) Failed to load module "glx" (loader failed, 7)
>
> [3243164.479] (II) LoadModule: "vivante"
>
> [3243164.508] (II)
> Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
>
> [3243164.529] (II) Module vivante: vendor="X.Org Foundation"
>
> [3243164.543] compiled for 1.18.4, module version = 1.0.0
>
> [3243164.580] Module class: X.Org Video Driver
>
> [3243164.599] ABI class: X.Org Video Driver, version 20.0
>
> [3243164.619] (II) VIVANTE: driver for vivante fb: VivanteGC500,
> VivanteGC2100,
>
> VivanteGCCORE
>
> [3243164.732] (--) using VT number 2
>
>
>
> [3243164.793] (WW) Falling back to old probe method for vivante
>
> [3243164.806] (II) Loading sub module "fbdevhw"
>
> [3243164.825] (II) LoadModule: "fbdevhw"
>
> [3243164.864] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
>
> [3243164.877] (II) Module fbdevhw: vendor="X.Org Foundation"
>
> [3243164.896] compiled for 1.18.4, module version = 0.0.2
>
> [3243164.928] ABI class: X.Org Video Driver, version 20.0
>
> [3243164.948] (II) VIVANTE(0): using default device
>
> [3243164.963] (II) VIVANTE(0): Device preferred mode
> 'fb0':U:1280x800p-60
>
> [3243164.983] (II) VIVANTE(0): Creating default Display subsection in
> Screen section
>
> "Default Screen Section" for depth/fbbpp 24/32
>
> [3243165.012] (==) VIVANTE(0): Depth 24, (==) framebuffer bpp 32
>
> [3243165.059] (==) VIVANTE(0): RGB weight 888
>
> [3243165.090] (==) VIVANTE(0): Default visual is TrueColor
>
> [3243165.112] (==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
>
> [3243165.145] (**) VIVANTE(0): Option "fbdev" "/dev/fb0"
>
> [3243165.181] (II) VIVANTE(0): checking modes against framebuffer
> device...
>
> [3243165.200] (II) VIVANTE(0): checking modes against monitor...
>
> [3243165.220] (II) VIVANTE(0): Use built in mode (bpp 32)
>
> [3243165.245] (--) VIVANTE(0): Virtual size is 0x0 (pitch 0)
>
> [3243165.275] (==) VIVANTE(0): DPI set to (96, 96)
>
> [3243165.294] (II) Loading sub module "fb"
>
> [3243165.319] (II) LoadModule: "fb"
>
> [3243165.344] (II) Loading /usr/lib/xorg/modules/libfb.so
>
> [3243165.365] (II) Module fb: vendor="X.Org Foundation"
>
> [3243165.393] compiled for 1.18.4, module version = 1.0.0
>
> [3243165.422] ABI class: X.Org ANSI C Emulation, version 0.4
>
> [3243165.453] (II) Loading sub module "exa"
>
> [3243165.472] (II) LoadModule: "exa"
>
> [3243165.510] (II) Loading /usr/lib/xorg/modules/libexa.so
>
> [3243165.524] (II) Module exa: vendor="X.Org Foundation"
>
> [3243165.544] compiled for 1.18.4, module version = 2.6.0
>
> [3243165.581] ABI class: X.Org Video Driver, version 20.0
>
> [3243165.657] (II) VIVANTE(0): printing discovered frame buffer 'fb0'
> supported modes:
>
> [3243165.688] (II) VIVANTE(0): Modeline "U:1920x1080p-59"x0.0 138.50
> 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync -csync (66.6
> kHz e)
>
> [3243165.708] (II) VIVANTE(0): Modeline "U:1280x800p-60"x0.0 68.30
> 1280 1344 1345 1350 800 840 841 843 -hsync -vsync -csync (50.6 kHz
> eP)
>
> [3243165.743] (II) VIVANTE(0): Modeline "U:1024x768p-60"x0.0 65.00
> 1024 1048 1184 1344 768 771 777 806 -hsync -vsync -csync (48.4 kHz e)
>
> [3243165.761] (II) VIVANTE(0): Modeline "U:800x600p-86"x0.0 55.00
> 800 832 912 1024 600 617 621 624 -hsync -vsync -csync (53.7 kHz e)
>
> [3243165.805] (II) VIVANTE(0): Output DISP4 BG - DI1 has no monitor
> section
>
> [3243165.837] (II) VIVANTE(0): Printing probed modes for output DISP4
> BG - DI1
>
> [3243165.862] (II) VIVANTE(0): Modeline "U:1280x800p-60"x60.0 68.30
> 1280 1344 1345 1350 800 840 841 843 -hsync -vsync -csync (50.6 kHz
> eP)
>
> [3243165.887] (II) VIVANTE(0): Modeline "U:1920x1080p-59"x59.9 138.50
> 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync -csync (66.6
> kHz e)
>
> [3243165.906] (II) VIVANTE(0): Modeline "U:1024x768p-60"x60.0 65.00
> 1024 1048 1184 1344 768 771 777 806 -hsync -vsync -csync (48.4 kHz e)
>
> [3243165.925] (II) VIVANTE(0): Modeline "U:800x600p-86"x86.1 55.00
> 800 832 912 1024 600 617 621 624 -hsync -vsync -csync (53.7 kHz e)
>
> [3243165.939] (II) VIVANTE(0): Output DISP4 BG - DI1 connected
>
> [3243165.953] (II) VIVANTE(0): Using exact sizes for initial modes
>
> [3243165.970] (II) VIVANTE(0): Output DISP4 BG - DI1 using initial
> mode U:1280x800p-60 +0+0
>
> [3243165.995] (II) VIVANTE(0): imxDisplayPreInit: virtual set 1280 x
> 800, display width 0
>
> [3243166.019] (II) VIVANTE(0): FBDevPreInit: adjust display width 1280
>
> [3243166.051] (**) VIVANTE(0): PreInit done
>
> [3243166.070] (--) Depth 24 pixmap format is 32 bpp
>
> [3243166.096] (II) VIVANTE(0): Init mode for fb device
>
> [3243166.154] (II) VIVANTE(0): hardware: DISP4 BG - DI1 (video memory:
> 16330kB)
>
> [3243166.170] (II) VIVANTE(0): FB Start = 0x75786000 FB Base =
> 0x75786000 FB Offset = (nil) FB PhyBase 0x44800000
>
> [3243166.190] (II) VIVANTE(0): reserve 8355840 bytes for on screen
> frame buffer; total fb memory size 16721920 bytes; offset of shadow
> buffer 8355840
>
> [3243166.254] (II) VIVANTE(0): hardware: DISP4 BG - DI1 (video memory:
> 16330kB)
>
> [3243166.295] (II) VIVANTE(0): test Initializing EXA
>
> [3243166.328] (II) EXA(0): Driver allocated offscreen pixmaps
>
> [3243166.348] (II) EXA(0): Driver registered support for the following
> operations:
>
> [3243166.376] (II) Solid
>
> [3243166.395] (II) Copy
>
> [3243166.409] (II) Composite (RENDER acceleration)
>
> [3243166.423] (II) UploadToScreen
>
> [3243166.453] (II) VIVANTE(0): Init SHM pixmap support
>
> [3243166.478] (==) VIVANTE(0): Backing store enabled
>
> [3243166.501] (==) VIVANTE(0): DPMS enabled
>
> [3243166.521] (II) VIVANTE(0): RandR 1.2 enabled, ignore the following
> RandR disabled message.
>
> [3243166.551] (--) RandR disabled
>
> [3243166.572] (II) VIVANTE(0): Setting screen physical size to 338 x
> 211
>
>
> _______________________________________________
> etnaviv mailing list
> etnaviv at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/etnaviv
More information about the etnaviv
mailing list